Medusa chandelier

Show off your prints, mods, etc.
User avatar
woofy
Posts: 68
Joined: Sun Jun 12, 2016 4:09 pm

Medusa chandelier

Postby woofy » Wed Dec 28, 2016 2:07 pm

Hi everyone.

I designed and printed a "Medusa Chandelier" over the xmas break.
http://www.thingiverse.com/thing:2001153

Printed with Raise3D premium white PLA.
Settings: Raise3D Speed Template on glass bed at 80 C.
Attachments
20161228_084533.jpg
20161227_193007.jpg
20161227_162844.jpg
Raise3D N2+, Ultimaker2 & UP plus printers.

User avatar
walshlg
Posts: 967
Joined: Wed Mar 23, 2016 12:01 pm

Re: Medusa chandelier

Postby walshlg » Wed Dec 28, 2016 2:45 pm

Nice design! Any trouble with the hollow arms where the wiring goes? What did you print it in?

User avatar
woofy
Posts: 68
Joined: Sun Jun 12, 2016 4:09 pm

Re: Medusa chandelier

Postby woofy » Wed Dec 28, 2016 4:18 pm

No, the arms printed fine with no supports.
The tricky part was putting the chains on the part printed loops at each end as they are printing. I did it on the fly without pausing the print.
Raise3D N2+, Ultimaker2 & UP plus printers.

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Wed Dec 28, 2016 4:58 pm

hell yeah thats one hellof a print been thinking of the next things to do was meant to do a lamp for our hall way im gonna do this in carbonfil petg thanks for sharing no wait ive another plan white and carbon petg

User avatar
Vicky@Raise3D
Posts: 1628
Joined: Fri Mar 25, 2016 3:54 am

Re: Medusa chandelier

Postby Vicky@Raise3D » Thu Dec 29, 2016 5:17 am

Nice shoot!
Thanks for sharing.

lami3d
Posts: 160
Joined: Sat Oct 29, 2016 7:40 am
Location: Marseille - France

Re: Medusa chandelier

Postby lami3d » Fri Dec 30, 2016 9:08 pm

Very nice, i'm gonna print one ! Tx

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Sun Jan 08, 2017 11:50 am

hi woofy what way did you print the arms at was they flat as ive tried twice now with different top layers and no supports but the top comes out all bubbly as their is no support but if we put supports in wont get them out to put wire though cheers

User avatar
woofy
Posts: 68
Joined: Sun Jun 12, 2016 4:09 pm

Re: Medusa chandelier

Postby woofy » Sun Jan 08, 2017 6:26 pm

It was printed with Raise3D premium white PLA, the settings are the raise3D Speed Template on a glass bed at 80 C.
I can't look up the exact settings until I get I to work tomorrow, but the only change is the bed temp and added M201 X500 Y500 to the start gcode. I found the top surface covered well with no support. Printed with the printer top removed.

What filament are you using?
Raise3D N2+, Ultimaker2 & UP plus printers.

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Mon Jan 09, 2017 1:50 pm

im using a recycled petg white i had a go at the chain section last night im going to turn my heat down to 215 and slowing speed down as well as i got up this morning and the top was messy and the chain was crumbly
its ok doing test cubes but when printing its a different game changer

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Tue Jan 10, 2017 9:10 am

well i tried my petg carbon and it has done the smaller arms spot on just got to figure the white petg as im doing it in black and white

User avatar
woofy
Posts: 68
Joined: Sun Jun 12, 2016 4:09 pm

Re: Medusa chandelier

Postby woofy » Tue Jan 10, 2017 10:20 am

swampy wrote:well i tried my petg carbon and it has done the smaller arms spot on just got to figure the white petg as im doing it in black and white

Should look good, looking forward to a photo when you've built it.
Raise3D N2+, Ultimaker2 & UP plus printers.

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Tue Jan 10, 2017 6:04 pm

yeap plugging away think im gonna try the white petg at about 205 temp did you use screws to fix it togeather and which ones did you use thanks

User avatar
woofy
Posts: 68
Joined: Sun Jun 12, 2016 4:09 pm

Re: Medusa chandelier

Postby woofy » Wed Jan 11, 2017 10:00 am

I use No 4 self tapping screws from here:
https://www.rapidonline.com/affix-stainless-steel-pan-head-pozidriv-self-tapping-screws-64755
Get yourself all 3 lengths, I used all 3 as I see fit.
Raise3D N2+, Ultimaker2 & UP plus printers.

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Thu Jan 12, 2017 6:48 pm

cheers will get some on monday from my nut and bolt store man iv almost done the arms i think i would have been better doing then with a .05mm nozzle plus found problem with the top fil i got my lid of now coooling it quicker and the fan cover off think i will do some mods later i got some covers for the hot end but im getting their just the hardest to look forward to and thats the chains shall do them on a raft

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Mon Feb 27, 2017 5:52 pm

here we go filnally made it but didnt print the chains as i was struggling to do them so cheated i added a pot on top as i soldered the 12 wires together and hid them underneath
Attachments
16865023_1852506605002339_821537609893594552_n.jpg
16998067_1852506601669006_4169653684261842883_n.jpg
16864877_1852506608335672_5433779938117178080_n.jpg
17022041_1852506541669012_4513805943865058430_n.jpg
17021879_1852506678335665_4578358847696408953_n.jpg

User avatar
woofy
Posts: 68
Joined: Sun Jun 12, 2016 4:09 pm

Re: Medusa chandelier

Postby woofy » Mon Feb 27, 2017 6:19 pm

Well done, Swampy.
I like the effect the black and white gives it.
Raise3D N2+, Ultimaker2 & UP plus printers.

swampy
Posts: 238
Joined: Tue Mar 22, 2016 7:18 pm
Location: BEDFORDSHIRE UK

Re: Medusa chandelier

Postby swampy » Tue Feb 28, 2017 7:50 pm

only 1 problem she wants one on the landing now lol thought the little pot on top to hide the wires as their is 12 of them all tinned together goes well thanks for that design im gonna try some lithio lamp shades for the bedroom with david bowie on for her


Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest