Cellular Lamp

Show off your prints, mods, etc.
User avatar
Posts: 70
Joined: Wed Mar 30, 2016 5:07 pm

Cellular Lamp

Postby Wibb » Sun Oct 09, 2016 11:26 am

original file http://www.thingiverse.com/thing:19104
Scale to fit N2+ @ 305x305x605mm
Time to print: 53.5h
Material: ABS (Esun)
Nozzle 0.5mm
Layer 0.4mm
Fill:15% Grid
Travel: 200mm/s
Feed: 70mm/s (all modes)
Bed Temp: 110c
Nozzle Temp:260c
Retract: 2mm
Zhop: 0.3mm

Posts: 70
Joined: Sat Jul 02, 2016 7:53 pm

Re: Cellular Lamp

Postby Rockman » Sun Oct 09, 2016 1:14 pm

Good job !
Been thinking about printing a similar lamp on my N2 :)

Why did you choose ABS and a 0.5 nozzle ?

User avatar
Posts: 70
Joined: Wed Mar 30, 2016 5:07 pm

Re: Cellular Lamp

Postby Wibb » Sun Oct 09, 2016 1:30 pm

0.5 is more robust agaisnt clogging than 0.4, can extrude faster and at taller layer heights. ABS because thats what i have a lot of at this time.

User avatar
Posts: 3607
Joined: Fri Mar 25, 2016 3:54 am

Re: Cellular Lamp

Postby Vicky@Raise3D » Mon Oct 10, 2016 6:35 am

That is very eye appealing!

User avatar
Posts: 1346
Joined: Wed Mar 23, 2016 12:01 pm

Re: Cellular Lamp

Postby walshlg » Mon Oct 10, 2016 5:38 pm

nifty, what will you do to make it a lamp?? please post a final pic

Posts: 6
Joined: Mon Jan 02, 2017 8:53 am

Re: Cellular Lamp

Postby 3dtech » Wed Apr 12, 2017 11:25 am

I've uploaded a new version (cellularThing_optimizedForMakerbot.stl) that is optimized for a MakerBot Replicator. The bottom of the model is sliced off to make it completely flat, the thinnest members of the structure have been thickened. 3d printing chandigarth kochi - fdm technology


Recommended printing settings:
Shells: 3
Infill: none
Support: none
Feed Rate: 40 or less

Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest