I'm wondering what people here are doing for fume extraction and fume hoods.
I've been using PLA for most of the past year or so and only occasionally printing ABS, so having a box fan set to "exhaust" that fits into the window next to my N2+ has been fine.
I'm starting to print more PETG, ABS, ASA and less PLA, so I'm now thinking it might be time to move to a more active system.
I've thought of a couple things:
1. A full-on cover ala what Billucas is making, with a hole cut in the top , attach a dryer-hose to that and run it up to the fan.
2. cut a hole in the side of the right-hand door, attach a hose there and run that to the fan.
3. I don't often print full-height objects, so maybe just a fume-extractor like I have on my soldering bench inside the print chamber would do the trick. It would help with keeping the air around the print at temperature.
Please to be making with the quibbling
Topics around mechanical design, controller and electronics. Mods & hacks welcome.
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests