Which Nozzle for Pro 2 +

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
Korni
Posts: 52
Joined: Wed Apr 11, 2018 8:11 am

Which Nozzle for Pro 2 +

Postby Korni » Thu May 24, 2018 9:13 pm

Which nozzles are used in the Pro2 + series?
I would like to order matching replacement nozzles and other diameters before.
Feel free to post (german) order links.

Thank you

P.S.
Is there already (video) instructions how the nozzle change is performed correctly?

User avatar
Vicky@Raise3D
Posts: 3624
Joined: Fri Mar 25, 2016 3:54 am

Re: Which Nozzle for Pro 2 +

Postby Vicky@Raise3D » Fri May 25, 2018 10:12 am

We will open order for difference sizes nozzle for Pro2 series soon.

Please contact our support team for the instructions. They will share your via mail.
We are preparing web pages for instructions currently. Later you can see the instructions directly on our website.

Korni
Posts: 52
Joined: Wed Apr 11, 2018 8:11 am

Re: Which Nozzle for Pro 2 +

Postby Korni » Fri May 25, 2018 10:20 am

It must be to buy commercially available nozzles of any third party manufacturers? Are special nozzles installed that nobody else has or produces ??? :-(

User avatar
Vicky@Raise3D
Posts: 3624
Joined: Fri Mar 25, 2016 3:54 am

Re: Which Nozzle for Pro 2 +

Postby Vicky@Raise3D » Fri May 25, 2018 3:17 pm

As long as the nozzle is with thread with M6 and length of the thread is over 5.5mm, it can be installed on Pro2 series printers' hot ends. But we cannot assure the printing result from the parts from third party manufacturers.

Korni
Posts: 52
Joined: Wed Apr 11, 2018 8:11 am

Re: Which Nozzle for Pro 2 +

Postby Korni » Tue May 29, 2018 7:01 pm

Vicky@Raise3D wrote:We will open order for difference sizes nozzle for Pro2 series soon.

Please contact our support team for the instructions. They will share your via mail.
We are preparing web pages for instructions currently. Later you can see the instructions directly on our website.


Any news .... for order or instructions ???

User avatar
Vicky@Raise3D
Posts: 3624
Joined: Fri Mar 25, 2016 3:54 am

Re: Which Nozzle for Pro 2 +

Postby Vicky@Raise3D » Wed May 30, 2018 7:55 am

We are going to open order of the harden type nozzles in early June. The instructions are under preparation now.


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 3 guests