V2 Hot End Information and Q&A

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
User avatar
John@Raise3D
Posts: 473
Joined: Fri Feb 26, 2016 8:42 am

Re: V2 Hot End Information and Q&A

Postby John@Raise3D » Fri Apr 29, 2016 8:24 am

What it the nozzle and bed temperature you are using? for which material?
You are right and increasing the gap will make it easier to peel.

socke
Posts: 212
Joined: Mon Mar 21, 2016 2:55 pm

Re: V2 Hot End Information and Q&A

Postby socke » Fri Apr 29, 2016 12:46 pm

I did set Raft Gap to 0.30mm, this is much better...
Bed is 90°C, nozzle 250°C for REAL PETG.

User avatar
John@Raise3D
Posts: 473
Joined: Fri Feb 26, 2016 8:42 am

Re: V2 Hot End Information and Q&A

Postby John@Raise3D » Fri Apr 29, 2016 3:02 pm

Great. Looking forward to your prints!

Chrigi78
Posts: 19
Joined: Wed Jul 27, 2016 9:14 am

Re: V2 Hot End Information and Q&A

Postby Chrigi78 » Tue Oct 11, 2016 8:02 am

Hey all

so we search the model for assembling the new Hot End V2 we dont found this ? we check on Thingverse
have you the data for print this part for help right assembling the hotend V2 ?

User avatar
Vicky@Raise3D
Posts: 2176
Joined: Fri Mar 25, 2016 3:54 am

Re: V2 Hot End Information and Q&A

Postby Vicky@Raise3D » Tue Oct 11, 2016 10:21 am

https://www.raise3d.com/pages/instructi ... assembling
There is a link named Installation tool stl file in this page. Please check whether it is the one you are looking for.

mark tyr3d
Posts: 21
Joined: Sun Oct 30, 2016 4:36 pm
Location: Ireland
Contact:

Re: V2 Hot End Information and Q&A

Postby mark tyr3d » Sun Oct 30, 2016 4:47 pm

I am planning on Buying a Raise3D N2 Plus next week from a Uk supplier, does it now come with the V2 hot end.

Charles
Posts: 154
Joined: Mon Mar 21, 2016 5:14 pm

Re: V2 Hot End Information and Q&A

Postby Charles » Sun Oct 30, 2016 5:54 pm

They have all been coming with the new V2 hotend for the last 6 months.

User avatar
Vicky@Raise3D
Posts: 2176
Joined: Fri Mar 25, 2016 3:54 am

Re: V2 Hot End Information and Q&A

Postby Vicky@Raise3D » Mon Oct 31, 2016 9:41 am

Yes. We have upgraded V2 from this spring.

mark tyr3d
Posts: 21
Joined: Sun Oct 30, 2016 4:36 pm
Location: Ireland
Contact:

Re: V2 Hot End Information and Q&A

Postby mark tyr3d » Wed Nov 16, 2016 5:31 pm

thanks

User avatar
Noren
Posts: 111
Joined: Sat Nov 26, 2016 12:54 am
Location: Borås, Sweden
Contact:

Re: V2 Hot End Information and Q&A

Postby Noren » Sat Nov 26, 2016 10:46 am

How do I know if my printer comes with a V2 hotend? I just ordered a N1 with dual extruders from 3dprima here in Sweden. Since they had one in stock. And your shop didn't. (Nor has any information when they would be available again).

User avatar
Vicky@Raise3D
Posts: 2176
Joined: Fri Mar 25, 2016 3:54 am

Re: V2 Hot End Information and Q&A

Postby Vicky@Raise3D » Mon Nov 28, 2016 6:46 am

The most obvious difference between V1 and V2 should be the amount of plate on heat sink.

Here is V1. Only has 6 plates on heat sink.
1.png

Here is V2. Has 7 plates on heat sink.
2.png


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 3 guests