Raise3D-printers compatible with Astroprint?

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
User avatar
Noren
Posts: 391
Joined: Sat Nov 26, 2016 12:54 am
Location: Borås, Sweden
Contact:

Raise3D-printers compatible with Astroprint?

Postby Noren » Mon Feb 27, 2017 8:01 am

Hi.
I wonder if the Astroprint box www.astroprint.com is compatible with the Raise3D-printers.
Since there are now way to connect to the printer via internet to show the status screen. The Astroprint box seems like a god alternative to use to monitor the printer, temperatures, progress and so on.
Anyone that uses it?

On there site they say:
AstroPrint is compatible with standard Marlin & Sailfish firmware based printers. If your printer runs on proprietary firmware or heavily modified Marlin/Sailfish firmware, it's unlikely that it would work with AstroPrint.

I really don't care for the slicing features but mainly about the remote monitoring features.
/Andreas

User avatar
walshlg
Posts: 1346
Joined: Wed Mar 23, 2016 12:01 pm

Re: Raise3D-printers compatible with Astroprint?

Postby walshlg » Mon Feb 27, 2017 5:08 pm

good luck, let us know if you make any progress. I have asked repeatedly for the Printer API but never got a single response

User avatar
Vicky@Raise3D
Posts: 4264
Joined: Fri Mar 25, 2016 3:54 am

Re: Raise3D-printers compatible with Astroprint?

Postby Vicky@Raise3D » Tue Feb 28, 2017 7:42 am

May cannot use. Cause we are not using standard Marlin, but a modified firmware.

Ikoth
Posts: 14
Joined: Mon Oct 31, 2016 7:01 pm

Re: Raise3D-printers compatible with Astroprint?

Postby Ikoth » Wed Mar 01, 2017 3:41 pm

Another upvote for external monitoring for the N2+ please, either via API (ideally), or a web interface that can be "scraped" to collect data.

User avatar
Vicky@Raise3D
Posts: 4264
Joined: Fri Mar 25, 2016 3:54 am

Re: Raise3D-printers compatible with Astroprint?

Postby Vicky@Raise3D » Thu Mar 02, 2017 3:11 am

Well noted. Will pass to software department.

woodwind
Posts: 3
Joined: Fri Jan 12, 2018 5:15 pm

Re: Raise3D-printers compatible with Astroprint?

Postby woodwind » Fri Jan 12, 2018 5:58 pm

the astrobox should work ith raise 2d plus or not? Is there anyone who uses this?

sylus
Posts: 107
Joined: Fri Aug 05, 2016 9:47 pm

Re: Raise3D-printers compatible with Astroprint?

Postby sylus » Sat Jan 13, 2018 10:53 pm

Yes it works,as octoprint too but with the sacrifice of the raisetouch.


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 12 guests