x and y axis compensation bug

Discussions about ideaMaker and other printing software.
Posts: 20
Joined: Mon Aug 29, 2016 5:21 pm

x and y axis compensation bug

Postby colbylippincott » Thu Oct 26, 2017 7:51 pm

It looks like the x axis compensation is effecting the scale in the y direction, and the y axis compensation doesn't do anything. I found this out after trying to fix the dimensions slightly and it not working at all. So I did 400% for the x axis, and for some reason it scaled the y axis instead. And then I tried setting the y axis to 400%, and the gcode didn't change at all.

User avatar
Posts: 225
Joined: Wed Jul 20, 2016 4:51 pm
Location: Costa Mesa

Re: x and y axis compensation bug

Postby Michael.P@Raise3D » Thu Oct 26, 2017 8:48 pm

Hi colbylippincott,

Would you like to share some pictures showing this effect you are seeing in the g-code. If this is a slicer bug we would like to get it patched.
Michael Petitclerc, Technician
Tel: +888 963 9028
Web: http://www.raise3d.com

Return to “Software”

Who is online

Users browsing this forum: No registered users and 3 guests