Maker's Muse Review

Discussions about ideaMaker and other printing software.
colbylippincott
Posts: 18
Joined: Mon Aug 29, 2016 5:21 pm

Maker's Muse Review

Postby colbylippincott » Thu Jul 27, 2017 7:45 pm

Just wanted to post this here and congratulate the ideaMaker team for building an awesome slicer. Keep up the good work!
https://www.youtube.com/watch?v=F7JuMa35IjA&t=1s

User avatar
Vicky@Raise3D
Posts: 2243
Joined: Fri Mar 25, 2016 3:54 am

Re: Maker's Muse Review

Postby Vicky@Raise3D » Fri Jul 28, 2017 6:51 am

Thanks for your sharing! :)

Wolfman
Posts: 29
Joined: Fri Apr 14, 2017 1:24 am

Re: Maker's Muse Review

Postby Wolfman » Fri Aug 25, 2017 4:25 pm

Here is another honest review from Angus. Enjoy it.

https://www.youtube.com/watch?v=FOqq6jhcRVY&t=329s

User avatar
Mecha_Monster
Posts: 126
Joined: Wed May 11, 2016 2:07 am
Location: Mexico
Contact:

Re: Maker's Muse Review

Postby Mecha_Monster » Fri Aug 25, 2017 5:24 pm

Good and honest review. Anyhow, as others reviews out there in youtube, it also felt short.
The main reason for what I bought the Raise3D is its accuracy and capabilities of printing PC. With my machine I print tools that according to the Metrology dept. are extremly close to the nominal dimensions. Thumbs up for the accuracy of the machine.
I have also found that is is easier to print PC than ABS. It sticks very well to the Buildtak and the chamber stays very warm.
The Idemaker AP and the wireless connection are solid points that are never mentioned.
The backup battery is a lifesaver feature that rarely is mentioned. I mean, I have been able to recover prints even after one week!

Of course that you need to tuerk and adjust your machine; you have to take care of it like a CNC machine, and take your time to properly learn how to use it and take extensive care of it (like proper cleaning, proper greasing, proper adjustment, etc). I mean, the Stratasys machines have very specific and strict instructions about how to clean their machines after each prints and before each print, why it should be different with the Raise3D N2?

I think it is a very capable and respectable machine, but you have to use it as a precision tool. and print slower (the default settings are waaaaay too fast)

User avatar
Vicky@Raise3D
Posts: 2243
Joined: Fri Mar 25, 2016 3:54 am

Re: Maker's Muse Review

Postby Vicky@Raise3D » Mon Aug 28, 2017 6:49 am

May I ask the difference of the printing settings of PC between yours and the default ones?
And may I ask for some pictures can difference between?
We'd like to feedback your thoughts to R&D and Testing department to check whether we need to change the default settings.


Return to “Printing Software”

Who is online

Users browsing this forum: No registered users and 3 guests