Hi, I would like to see the following fixed to improve the user experience and the resultant quality of the output. Hopefully it will not be a difficult thing to do.
Title: Travel Through Holes - unwanted side-effects
Description: Using the setting "Avoid Travelling Through Holes" [Other ] has an unexpected side-effect. If this option is enabled, then it also disables almost all filament retractions which can lead to serious oozing throughout the print. Not travelling through holes is a great feature to have, but it should not come at the expense of retractions. As there already is a "Enable Retraction" [Extruder] option, that setting should be honoured regardless of whether "Avoid Travelling Through Holes" is enabled. I would consider this a bug.
Operating System: Windows 10
GPU: Intel HD
32bit or 64bit: 64bit
Screen Resolution: 1920x1200
How to trigger: see description above
Expected result: Enabling or disabling the "Travel Through Holes" setting should only impact the head movements through or around holes and/or the object boundary.
Real Result: Enabling this option also disables retraction which leads to bad quality prints.
Discussions about ideaMaker and other printing software.
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 9 guests