Missing parts after slicing

Discussions about ideaMaker and other printing software.
SniperSK
Posts: 3
Joined: Mon Oct 22, 2018 9:26 pm

Missing parts after slicing

Postby SniperSK » Mon Oct 22, 2018 9:36 pm

Hello,

I am doing my first steps with my new Pro2 Plus and one of the things I wanted to do ist printing this test: https://www.thingiverse.com/thing:1363023
Although IdeaMaker identifies this as a valid object, after slicing the 'columns' on the bridging test part are missing, leaving the bridge floating in empy space. I tried to fiddle a bit with some settings but can't get these columns to stay when slicing.

MissingColumns.JPG


What is causing these parts to vanish during the slicing process and what can be done to avoid it?

Thanks

Evan
Posts: 124
Joined: Mon Mar 21, 2016 3:07 pm

Re: Missing parts after slicing

Postby Evan » Tue Oct 23, 2018 4:50 pm

Probably too small, try single outer shell instead of double.

SniperSK
Posts: 3
Joined: Mon Oct 22, 2018 9:26 pm

Re: Missing parts after slicing

Postby SniperSK » Wed Oct 24, 2018 10:42 pm

Even with 1 shell and 0.01mm layer height nothing changed. I can't get these columns shown/printed.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 7 guests