Flow Rate By Layer

Discussions about ideaMaker and other printing software.
NBorglum
Posts: 10
Joined: Thu Jul 26, 2018 11:40 pm

Flow Rate By Layer

Postby NBorglum » Mon Jul 30, 2018 8:02 pm

Hi,

Is it possible to change the global flowrate at different layers in a print?
I see where to select all the different settings at different layers, but didn't see this as option.

Thanks,
Nick

User avatar
Vicky@Raise3D
Posts: 4424
Joined: Fri Mar 25, 2016 3:54 am

Re: Flow Rate By Layer

Postby Vicky@Raise3D » Wed Aug 01, 2018 2:03 am

You can achieve it by adding codes under Gcode -> Layer Changing Gcode tab.
1.png
1.png (3.01 KiB) Viewed 340 times

The layers starts counting from the first layer including Raft structure.

NBorglum
Posts: 10
Joined: Thu Jul 26, 2018 11:40 pm

Re: Flow Rate By Layer

Postby NBorglum » Tue Aug 14, 2018 1:53 pm

Thanks, Vicky.
So if I changed the flow to 95 at layer 10 like you showed in the example. Would the rest of the part be printed at 95% flow or just layer 10?

User avatar
Vicky@Raise3D
Posts: 4424
Joined: Fri Mar 25, 2016 3:54 am

Re: Flow Rate By Layer

Postby Vicky@Raise3D » Wed Aug 15, 2018 12:29 am

The remaining layers will all be 95%.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 4 guests