PETG on Pro2

Thoughts about Raise3D, 3D printing and making in general.
Hellsbellsidaho
Posts: 55
Joined: Thu Apr 19, 2018 1:29 am

PETG on Pro2

Postby Hellsbellsidaho » Thu Jun 21, 2018 9:53 pm

Has anybody printed with PETG on the Pro2?

DeX
Posts: 88
Joined: Fri Apr 21, 2017 6:56 am

Re: PETG on Pro2

Postby DeX » Mon Jul 02, 2018 11:28 am

Print on N2 pretty good!

claytony565
Posts: 21
Joined: Mon May 07, 2018 4:07 pm

Re: PETG on Pro2

Postby claytony565 » Mon Jul 02, 2018 1:39 pm

I am currently running some tests on it now, I just tried on my N2+ for the first time last week and I had very weak layers and my outer shells actually peeled right off. I will let you know what works for PETG on the Pro2 once I can get it dialed in.

claytony565
Posts: 21
Joined: Mon May 07, 2018 4:07 pm

Re: PETG on Pro2

Postby claytony565 » Mon Jul 02, 2018 3:47 pm

Just finished a test cube with the standard PETG settings for the Pro2. Came out pretty well, much better than my print on the N2. the layers are very well bonded, there is some light stringing between pieces but not bad. I did not use a raft and it stuck to the buildtak very well with the bed distance set at 0.2 using the supplied feeler gauge.
Attachments
IMG_0844.JPG
IMG_0843.JPG
IMG_0842.JPG
IMG_0841.JPG


Return to “General”

Who is online

Users browsing this forum: No registered users and 3 guests