Do they sell a larger size nozzle for the Pro 2?

Thoughts about Raise3D, 3D printing and making in general.
Anthonyvanv
Posts: 12
Joined: Wed Mar 28, 2018 1:03 pm

Do they sell a larger size nozzle for the Pro 2?

Postby Anthonyvanv » Mon Jun 18, 2018 4:05 pm

Or is there somewhere I can buy one else where?

billbucket
Posts: 41
Joined: Sun Apr 22, 2018 7:41 pm

Re: Do they sell a larger size nozzle for the Pro 2?

Postby billbucket » Mon Jun 18, 2018 6:46 pm

They've mentioned elsewhere that as long as the nozzle is M6 x 5.5mm, it should be ok. Sorry, I don't have a link to where this was mentioned.

Jetguy
Posts: 2700
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: Do they sell a larger size nozzle for the Pro 2?

Postby Jetguy » Mon Jun 18, 2018 8:03 pm

Examples would be:
#1 N series existing nozzles do fit. The primary difference we can tell (without CAD drawings or side by side measurements) is that the hex size (what you would tighten with a wrench or nut driver) is the change and why they look different.

#2 E3D V6 style nozzles are known to fit
#3 Companies like 3D Solex makes nozzles both specifically for the Raise N series, but also Ultimaker compatible M6 threaded nozzles that I personally have tested (granted, in an N series). http://3dsolex.com/product-category/rai ... 3dnozzles/

User avatar
Vicky@Raise3D
Posts: 4415
Joined: Fri Mar 25, 2016 3:54 am

Re: Do they sell a larger size nozzle for the Pro 2?

Postby Vicky@Raise3D » Tue Jun 19, 2018 8:15 am

Different sizes harden nozzles are on our parts list. We will open the online order once we get enough stock.

NewbPilot
Posts: 258
Joined: Tue Jul 26, 2016 2:16 am
Location: West Palm Beach, FL
Contact:

Re: Do they sell a larger size nozzle for the Pro 2?

Postby NewbPilot » Fri Nov 02, 2018 10:24 pm

Vicky@Raise3D wrote:Different sizes harden nozzles are on our parts list. We will open the online order once we get enough stock.

I am still looking for a 1.0 or 1.2mm nozzle for my N1 and N2 ... the store stops at 0.8mm :)

User avatar
Vicky@Raise3D
Posts: 4415
Joined: Fri Mar 25, 2016 3:54 am

Re: Do they sell a larger size nozzle for the Pro 2?

Postby Vicky@Raise3D » Mon Nov 05, 2018 8:48 pm

NewbPilot wrote:
Vicky@Raise3D wrote:Different sizes harden nozzles are on our parts list. We will open the online order once we get enough stock.

I am still looking for a 1.0 or 1.2mm nozzle for my N1 and N2 ... the store stops at 0.8mm :)


You may check search in the forum. I remember someone has shared some good experience with larger 3rd party nozzle on N series printer.


Return to “General”

Who is online

Users browsing this forum: Deepspaceobject and 7 guests