STL Design Shared

Thoughts about Raise3D, 3D printing and making in general.
User avatar
Vicky@Raise3D
Posts: 4117
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Fri Jun 15, 2018 10:51 pm

Iamkar33m wrote:Raise3D, can we get the STL file you use at the factory for bed level testing? Thanks!

- Kareem


Attached the sliced files for you we using in factory to checking the levelness of Pro2.
Pro2 Leveling Calibration.rar
(43.45 KiB) Downloaded 44 times

User avatar
Vicky@Raise3D
Posts: 4117
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Fri Jun 15, 2018 10:51 pm

Jetguy wrote:
Vicky@Raise3D wrote:
Jetguy wrote:Vicky, could you find the power socket cover I just posted the picture of?? I know it's 3D printed so that means somebody has the STL at the factory. Just trying to add safety for those of us with early N2 and N2Plus from the kickstarter. I had used a big piece of heatshrink to make mine safer but there is exposed mains 110 on the backside of the IEC power entry panel between the input and the fuse (the metal bus bar).
Again, earlybird N2 picture under the printer
IMG_0464[1].JPG


Here is the 3D printed version as seen on my new N2Plus
IMG_0463[1].JPG


Here it is. To install it, you need to replace the current two screws to be about M4*16, a little longer than current two.
Power Socket Cover.STL


It could be I overlooked this when searching the master list on the first post here, but could you please edit the page and ensure it's on the front master list of "official" STLs for the printer?


Done.

Hellsbellsidaho
Posts: 64
Joined: Thu Apr 19, 2018 1:29 am

Re: STL Design Shared

Postby Hellsbellsidaho » Fri Jun 22, 2018 12:10 pm

Need the center fan shroud for the Pro2. Is the STL available?

User avatar
Vicky@Raise3D
Posts: 4117
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Sat Jun 23, 2018 1:15 am

Hellsbellsidaho wrote:Need the center fan shroud for the Pro2. Is the STL available?


Pro2 Model Cooling Fan Duct.STL
(1.24 MiB) Downloaded 87 times
Pro2 Nozzle Cooling Fan Duct.STL
(2.21 MiB) Downloaded 98 times

DeX
Posts: 92
Joined: Fri Apr 21, 2017 6:56 am

Re: STL Design Shared

Postby DeX » Sat Jul 14, 2018 8:57 am

Vicky@Raise3D wrote:
Iamkar33m wrote:Raise3D, can we get the STL file you use at the factory for bed level testing? Thanks!

- Kareem


Attached the sliced files for you we using in factory to checking the levelness of Pro2.
Pro2 Leveling Calibration.rar




GREAT! Could we get the same thing for R3D N2 Series? (gcode and stl) Thanks!


(Maybe it could be nice to have these Calibrations Files under the Downloads section of raise3d.com)

User avatar
Vicky@Raise3D
Posts: 4117
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Tue Jul 17, 2018 6:11 am

DeX wrote:
Vicky@Raise3D wrote:
Iamkar33m wrote:Raise3D, can we get the STL file you use at the factory for bed level testing? Thanks!

- Kareem


Attached the sliced files for you we using in factory to checking the levelness of Pro2.
Pro2 Leveling Calibration.rar




GREAT! Could we get the same thing for R3D N2 Series? (gcode and stl) Thanks!


(Maybe it could be nice to have these Calibrations Files under the Downloads section of raise3d.com)


Sorry, but I only have .gcode file on hand which is used in factory for calibration the printers.
Actually N series can use the same calibration file as Pro2 series, as the printing volume in X&Y are almost the same.

DeX
Posts: 92
Joined: Fri Apr 21, 2017 6:56 am

Re: STL Design Shared

Postby DeX » Tue Jul 17, 2018 9:29 am

Vicky, OK then!

Prop-Fiction
Posts: 65
Joined: Fri Jun 15, 2018 10:39 pm

Re: STL Design Shared

Postby Prop-Fiction » Fri Jul 27, 2018 2:28 pm

By the Pro2 Model cooling the STL. I can´t change the File. Can you push us a open version of it?
Es gibt kein das „geht nicht“, immer nur eine Frage des Geldes oder der Zeit.

Schlaf wird überbewertet.

My Costume website
http://www.prop-fiction.de

User avatar
Vicky@Raise3D
Posts: 4117
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Sat Jul 28, 2018 2:17 am

Here you go.
Pro2 Fan Ducts.rar
(90.24 KiB) Downloaded 37 times


Return to “General”

Who is online

Users browsing this forum: No registered users and 4 guests