STL Design Shared

Thoughts about Raise3D, 3D printing and making in general.
firesped
Posts: 818
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Mon Jul 17, 2017 8:33 am

I'll have to take it apart again. I modified the part by putting some thread inserts into it so the screws have something to hold onto.

the part is a square box with some holes to screw the endstop board into the shim. It has offset holes to screw the endstop board onto the back.

now that I am thinking about it. my issue is the endstop is not getting hit. I have been trying to figure out how this was corrected. the shim you posted may fix that issue but I still need the new endstops I already ordered. I'll need to get longer screws as well.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

User avatar
Vicky@Raise3D
Posts: 3043
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Mon Jul 17, 2017 10:32 am

Sounds like very similar to the one I shared. The one I shared may be a little thicker than the one on yours. May help you problem.

firesped
Posts: 818
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Tue Jul 18, 2017 12:31 am

got my bed level and got this printed. bought some M3 x 16 screws and got it installed. it is now homing correctly.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

User avatar
Vicky@Raise3D
Posts: 3043
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Tue Jul 18, 2017 2:34 am

Good to hear your feedback!

firesped
Posts: 818
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Fri Jul 28, 2017 9:47 pm

here is my filament runout sensor that uses the raise3d endstop.

https://www.thingiverse.com/thing:2457483
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

EldRick
Posts: 204
Joined: Thu Jun 22, 2017 5:55 am

Re: STL Design Shared

Postby EldRick » Sun Aug 27, 2017 5:24 pm

Please add to the list. I've scaled the Raise3D-provided fan duct .stl to the same height as the post-kickstarter injection molded piece, as part of this: http://www.thingiverse.com/thing:2502206

User avatar
3DWP
Posts: 39
Joined: Fri Dec 15, 2017 5:48 pm

Re: STL Design Shared

Postby 3DWP » Sat Dec 23, 2017 1:18 pm

I posted a dual color extruder board cover on Thingiverse so you see the Raise3d logo better: https://www.thingiverse.com/thing:2727001

Raise3DExtruderBoardCover.JPG

User avatar
Noren
Posts: 228
Joined: Sat Nov 26, 2016 12:54 am
Location: Borås, Sweden
Contact:

Re: STL Design Shared

Postby Noren » Sat Feb 03, 2018 8:27 pm

Edit:

I noticed that the files for the V2 fancover was shared in a previous post in this thread.

Please add them to the first post.
(Also add them to the meny with example models in IdeaMaker).

Just like we get software updates. It would be nice if Raise3D could send out “parts updates” as well. Look at how Prusa does. They are great about fixing faults or problems and communicating this to the community and make files available.

I also have a question about this "edge" on the bottom of the V2 fanduct. (see image).
I's the edge "by design"? Is it there to deflect the airflow downwards?

I haven't done any simulations on the airflow since I don't have that knowledge.
Do you have any pictures on the simulated airflow that you can share?
Just curious.

fan.jpg

User avatar
Vicky@Raise3D
Posts: 3043
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Mon Feb 05, 2018 3:05 am

Noren wrote:Edit:

I noticed that the files for the V2 fancover was shared in a previous post in this thread.

Please add them to the first post.
(Also add them to the meny with example models in IdeaMaker).

Just like we get software updates. It would be nice if Raise3D could send out “parts updates” as well. Look at how Prusa does. They are great about fixing faults or problems and communicating this to the community and make files available.

I also have a question about this "edge" on the bottom of the V2 fanduct. (see image).
I's the edge "by design"? Is it there to deflect the airflow downwards?

I haven't done any simulations on the airflow since I don't have that knowledge.
Do you have any pictures on the simulated airflow that you can share?
Just curious.

fan.jpg


Update done.
The "edge" is designed to be there.
One purpose is for controlling the airflow direction as you said. The other purpose is due to that it is a molding part, leaving an edge there is for keeping the wall thickness of the whole structure to be uniform.

User avatar
3DWP
Posts: 39
Joined: Fri Dec 15, 2017 5:48 pm

Re: STL Design Shared

Postby 3DWP » Tue Feb 13, 2018 3:23 pm

I uploaded a fan mod on Thingiverse. In this setup the 35 mm fans only cool the cold end and an extra 40 mm fan on the front can cool the prints of both nozzles using gcode. Link: https://www.thingiverse.com/thing:2792586

Raise3DFanMod.jpg


This was made on my N2 Plus Dual, can somebody confirm this would fit on all N series?


Return to “General”

Who is online

Users browsing this forum: craigan69 and 3 guests