STL Design Shared

Thoughts about Raise3D, 3D printing and making in general.
User avatar
John@Raise3D
Posts: 483
Joined: Fri Feb 26, 2016 8:42 am

STL Design Shared

Postby John@Raise3D » Wed Mar 02, 2016 2:09 am

Here is a summary of all designs shared with the community. If any of your design is missing from here, please contact us so we can update this post. Thanks everyone!
You are welcomed to make your requests in the replies. After the requested file is updated, we will delete the replies so that we can keep this post as simple as possible.

R3D STL File
35mm fan.STL
(90.32 KiB) Downloaded 710 times
35mm fan bottom cover.STL
(12.78 KiB) Downloaded 424 times
Board Cover.STL
(206.33 KiB) Downloaded 399 times

Extruder Cover Installing Instructure: viewtopic.php?f=4&t=840&p=8028&sid=cf6ca44f53186014b0838de409b6b17c#p8028
Dual Extruder Cover with Holes.STL
(303.1 KiB) Downloaded 217 times
Dual Extruder Cover.STL
(235.74 KiB) Downloaded 141 times
N1 Single Extruder Cover.STL
(388.7 KiB) Downloaded 71 times
N2 Single Extruder Cover.STL
(347.82 KiB) Downloaded 111 times


Kwan Sheung Fung
Chinese New Year Design
http://www.thingiverse.com/thing:1294536
http://www.thingiverse.com/thing:1294529
http://www.thingiverse.com/thing:1295344
http://www.thingiverse.com/thing:1300209
Raies3D Travel Tag
http://www.thingiverse.com/thing:1295344

Top Cover Props for N2/N2+
Julia Truchsess http://www.thingiverse.com/thing:1280083
Adan Akerman http://www.thingiverse.com/thing:1319979
Kwan Sheung Fung http://www.thingiverse.com/thing:1324042 http://www.thingiverse.com/thing:1324935

Geoffrey Myers
Raise N1 Heatbed Cable Deflector
http://www.thingiverse.com/thing:1327016
Raise N1 Reel Axle Spacer
http://www.thingiverse.com/thing:1327419

Julia Truchsess
Filament Support / Bend Radius Control Add-On
http://www.thingiverse.com/thing:1273187

Fan Duct
Andy Cohen
http://www.thingiverse.com/thing:1261698
http://www.thingiverse.com/thing:1355622
http://www.thingiverse.com/thing:1557752
Matthew Lozano http://www.thingiverse.com/thing:1335835
Michael Nolen http://www.thingiverse.com/thing:1378030
Michael Nolen http://www.thingiverse.com/thing:1557752
socke http://www.thingiverse.com/thing:1704781

Custom Spool Holder for N2
Dave Hylands http://www.thingiverse.com/thing:1360118
Andreas Lindner http://www.thingiverse.com/thing:1375267

Room Air Tunnel for Main Board
Michael Wall http://www.thingiverse.com/thing:1329744

SnapClaw–Multi-Purpose Clip
Matthew Lozano http://www.thingiverse.com/thing:1324076

Active Air Flow Duct System
Michael Nolen http://www.thingiverse.com/thing:1377288

Spacer for extruder to fix air printing
Michael Hauser http://www.thingiverse.com/thing:1360390

Extruder top mount block
Michael Nolen
http://www.thingiverse.com/thing:1377288

Matthew Lozano
Spool holder lock
http://www.thingiverse.com/thing:1393658

Simon Poon
Ducted Electronics Box Cover for N2 Series
http://www.thingiverse.com/thing:1513773

Fan Cover (no downward cooling)
http://www.thingiverse.com/thing:1584183

Filament support Bracket for N2 series
http://www.thingiverse.com/thing:1473365

Web Cam Mounting Bracket for N2 Series
http://www.thingiverse.com/thing:1489386

Dial indicator for bed leveling
DreamForge
http://www.amazon.com/Anytime-Tools-Ind ... ge_o03_s01
http://www.thingiverse.com/thing:1584618

N2/N2+ single and dual model fan mod
Jeffs
http://www.thingiverse.com/thing:1960676

N2/N2+ dual filament guide tube bracket
Jeffs
http://www.thingiverse.com/thing:1963634

Front Mounted Blower Fan Duct
Michael Nolen
http://www.thingiverse.com/thing:2089681
Last edited by John@Raise3D on Tue Mar 22, 2016 7:12 am, edited 4 times in total.

User avatar
Wibb
Posts: 70
Joined: Wed Mar 30, 2016 5:07 pm

Re: STL Design Shared

Postby Wibb » Fri Apr 29, 2016 10:50 pm

Please add this to the list:
Simon Poon
Ducted Electronics Box Cover for N2 Series
http://www.thingiverse.com/thing:1513773

thank you

firesped
Posts: 747
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Thu May 12, 2016 7:33 am

New version of the Fan Ducts.
now combines the offical side air ducts with Andy Cohen's design.
http://www.thingiverse.com/thing:1557752
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

socke
Posts: 221
Joined: Mon Mar 21, 2016 2:55 pm

Fan Duct for Raise 3D N2/N2+, Single Extruder

Postby socke » Fri Aug 05, 2016 7:36 am

Another fan duct for N2 in single configuration: http://www.thingiverse.com/thing:1704781
@R3D: Please add this to the list...

User avatar
rhines44
Posts: 71
Joined: Mon Jun 13, 2016 5:14 pm
Location: Illinois

Re: STL Design Shared

Postby rhines44 » Tue Aug 23, 2016 5:03 am

I just installed these fan guards today.

Raise3D - 35mm Fan Guard found on #Thingiverse https://www.thingiverse.com/thing:1732394
Attachments
20160822_205817.jpg

User avatar
oppre1945
Posts: 1
Joined: Sat Sep 10, 2016 11:20 am

Re: STL Design Shared

Postby oppre1945 » Sat Sep 10, 2016 11:26 am

where can i get a spare fan duct mine is broken after two prints( just peeled off between layers, a bit crappy) or do you have an stl. so i can print my own?

User avatar
rhines44
Posts: 71
Joined: Mon Jun 13, 2016 5:14 pm
Location: Illinois

Re: STL Design Shared

Postby rhines44 » Sat Sep 10, 2016 11:34 am

oppre1945 wrote:where can i get a spare fan duct mine is broken after two prints( just peeled off between layers, a bit crappy) or do you have an stl. so i can print my own?


Top of this thread has a bunch of downloadable items to print. Duct being one of them I believe.

User avatar
Vicky@Raise3D
Posts: 2594
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Sat Sep 10, 2016 5:31 pm

oppre1945 wrote:where can i get a spare fan duct mine is broken after two prints( just peeled off between layers, a bit crappy) or do you have an stl. so i can print my own?

·.png

User avatar
rhines44
Posts: 71
Joined: Mon Jun 13, 2016 5:14 pm
Location: Illinois

Re: STL Design Shared

Postby rhines44 » Mon Oct 03, 2016 12:34 am

Here's a little something I added today. Nothing to do with function, but I was bored and wanted to do some printing.

N2 door pulls.

http://www.thingiverse.com/thing:1803734
Attachments
20161002_174905.jpg

budi67
Posts: 46
Joined: Sat Oct 15, 2016 5:56 pm

Re: STL Design Shared

Postby budi67 » Mon Nov 07, 2016 12:00 pm

I have one 35mm fan duct broken, it's made with PLA or ABS ?
Thanks

User avatar
Trhuster
Posts: 394
Joined: Tue Mar 22, 2016 6:01 am
Location: Sweden
Contact:

Re: STL Design Shared

Postby Trhuster » Mon Nov 07, 2016 12:12 pm

budi67 wrote:I have one 35mm fan duct broken, it's made with PLA or ABS ?
Thanks

ABS, it can take the heat alot better than PLA.

budi67
Posts: 46
Joined: Sat Oct 15, 2016 5:56 pm

Re: STL Design Shared

Postby budi67 » Mon Nov 07, 2016 4:32 pm

Trhuster wrote:
budi67 wrote:I have one 35mm fan duct broken, it's made with PLA or ABS ?
Thanks

ABS, it can take the heat alot better than PLA.


Thanks for your answer Trhuster ;)

JeffS
Posts: 13
Joined: Tue Dec 13, 2016 2:25 am

Re: STL Design Shared

Postby JeffS » Wed Dec 14, 2016 3:34 am

Raise3D Team, can you please add the following 2 links to the list?
Thanks.

N2/N2+ single and dual model fan mod
http://www.thingiverse.com/thing:1960676

N2/N2+ dual filament guide tube bracket
http://www.thingiverse.com/thing:1963634

User avatar
Vicky@Raise3D
Posts: 2594
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Wed Dec 14, 2016 4:10 am

JeffS wrote:Raise3D Team, can you please add the following 2 links to the list?
Thanks.

N2/N2+ single and dual model fan mod
http://www.thingiverse.com/thing:1960676

N2/N2+ dual filament guide tube bracket
http://www.thingiverse.com/thing:1963634


Done

firesped
Posts: 747
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Fri Feb 10, 2017 3:44 am

front mounted fan duct for blower fan.
This one screws into extruder so it is not dependent on mounts from the other fans.

http://www.thingiverse.com/make:299382
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

User avatar
Vicky@Raise3D
Posts: 2594
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Fri Feb 10, 2017 5:14 am

firesped wrote:front mounted fan duct for blower fan.
This one screws into extruder so it is not dependent on mounts from the other fans.

http://www.thingiverse.com/make:299382

Done

Charles
Posts: 155
Joined: Mon Mar 21, 2016 5:14 pm

Re: STL Design Shared

Postby Charles » Fri Feb 10, 2017 5:58 am

firesped wrote:front mounted fan duct for blower fan.
This one screws into extruder so it is not dependent on mounts from the other fans.

http://www.thingiverse.com/make:299382


didn't you mean to link this instead?

http://www.thingiverse.com/thing:2089681

firesped
Posts: 747
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Sat Feb 11, 2017 9:46 am

oops yea, I included the wrong link. one for a I made this. Thanks Charles.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

User avatar
Vicky@Raise3D
Posts: 2594
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Wed Feb 15, 2017 9:28 am

firesped wrote:oops yea, I included the wrong link. one for a I made this. Thanks Charles.


Link changed to Charles's one.

lami3d
Posts: 220
Joined: Sat Oct 29, 2016 7:40 am
Location: Marseille - France

Re: STL Design Shared

Postby lami3d » Fri Feb 17, 2017 1:52 pm

Hello,

20170217_142931.jpg


The one on the left is a fan duct that came with my N2+ in October2016, it was fdm printed
The one on the right is a new fan duct that came with my N2 a week ago, it seems casted

The new one is 3mm taller and it's more efficient because :
- the 3mm more concern the "window" in which the air is passing through to cool the heatsink (that allows to cool the last cooling fin at the bottom that used to be not very cooled with the previous fan duct)
- it blows 3mm closer to the object

The only remark i can make is that the parting line of the mould let a slight shift inside the bottom "window" (object cooling) and dust stays here. So, a light sanding and it's perfect in my opinion.


So, could you can share a stl file (or .obj or other) of this new design here µ?

Thanks in advance


Return to “General”

Who is online

Users browsing this forum: No registered users and 3 guests