STL Design Shared

Thoughts about Raise3D, 3D printing and making in general.
3D MAKE
Posts: 10
Joined: Sat Nov 05, 2016 3:57 pm

Re: STL Design Shared

Postby 3D MAKE » Fri Feb 17, 2017 7:17 pm

Ducts originals are not of great quality, my parents are deformed after a few dozen hours printing .. now I have a couple printed with colorfabb XT filament and seem to work well

sylus
Posts: 74
Joined: Fri Aug 05, 2016 9:47 pm

Re: STL Design Shared

Postby sylus » Fri Feb 17, 2017 7:59 pm

lami3d wrote:Hello,

So, could you can share a stl file (or .obj or other) of this new design here µ?

Thanks in advance

Yes share it please, ASA printed should be nice

lami3d
Posts: 220
Joined: Sat Oct 29, 2016 7:40 am
Location: Marseille - France

Re: STL Design Shared

Postby lami3d » Wed Feb 22, 2017 11:25 am

I think PC, colorfabb HT or Taulman Blueprint will be the best for heat resistance

But, is it possible to get this file please ?

Jetguy
Posts: 1659
Joined: Tue Mar 22, 2016 1:40 am

Re: STL Design Shared

Postby Jetguy » Wed Feb 22, 2017 1:38 pm

I got got my brand new N2Plus and saw that there is now a printed plastic cover over the IEC power connector receptacle rear in the base of the machine. Can you share that STL so that those with early Kickstarter machines can retrofit?

User avatar
walshlg
Posts: 1310
Joined: Wed Mar 23, 2016 12:01 pm

Re: STL Design Shared

Postby walshlg » Thu Feb 23, 2017 2:16 pm

Jetguy - PLease post a pic


Jetguy wrote:I got got my brand new N2Plus and saw that there is now a printed plastic cover over the IEC power connector receptacle rear in the base of the machine. Can you share that STL so that those with early Kickstarter machines can retrofit?

3D MAKE
Posts: 10
Joined: Sat Nov 05, 2016 3:57 pm

Re: STL Design Shared

Postby 3D MAKE » Fri Feb 24, 2017 3:20 pm


Jetguy
Posts: 1659
Joined: Tue Mar 22, 2016 1:40 am

Re: STL Design Shared

Postby Jetguy » Fri Feb 24, 2017 6:41 pm

Here is that picture of the latest N2Plus that has a cover over the IEC power cord inlet.
Since this is clearly a printed part, wondering if Raise 3D can share for retrofitting to my earlybird N2 which is exposed.
Attachments
IMG_0463[1].JPG

Online
User avatar
Vicky@Raise3D
Posts: 2291
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Sat Feb 25, 2017 3:48 pm

Yes, we opened molding for the newly made fan cover. And due to V2 hotend is a little longer than V2, so we also increase the length a little this time.
Here is the STL:
35-fancover-V2 type.STL
(202.04 KiB) Downloaded 49 times
35-fan-bottomcover-V2 type.STL
(12.78 KiB) Downloaded 43 times

Jetguy
Posts: 1659
Joined: Tue Mar 22, 2016 1:40 am

Re: STL Design Shared

Postby Jetguy » Sat Feb 25, 2017 4:30 pm

Vicky, could you find the power socket cover I just posted the picture of?? I know it's 3D printed so that means somebody has the STL at the factory. Just trying to add safety for those of us with early N2 and N2Plus from the kickstarter. I had used a big piece of heatshrink to make mine safer but there is exposed mains 110 on the backside of the IEC power entry panel between the input and the fuse (the metal bus bar).
Again, earlybird N2 picture under the printer
IMG_0464[1].JPG


Here is the 3D printed version as seen on my new N2Plus
IMG_0463[1].JPG

Online
User avatar
Vicky@Raise3D
Posts: 2291
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Sun Feb 26, 2017 2:51 pm

Jetguy wrote:Vicky, could you find the power socket cover I just posted the picture of?? I know it's 3D printed so that means somebody has the STL at the factory. Just trying to add safety for those of us with early N2 and N2Plus from the kickstarter. I had used a big piece of heatshrink to make mine safer but there is exposed mains 110 on the backside of the IEC power entry panel between the input and the fuse (the metal bus bar).
Again, earlybird N2 picture under the printer
The attachment IMG_0464[1].JPG is no longer available


Here is the 3D printed version as seen on my new N2Plus
Power Socket Cover.STL
(192.24 KiB) Downloaded 44 times


Here it is. To install it, you need to replace the current two screws to be about M4*16, a little longer than current two.
Power Socket Cover.STL
(192.24 KiB) Downloaded 44 times

itehlab
Posts: 17
Joined: Thu May 26, 2016 12:56 pm

Re: STL Design Shared

Postby itehlab » Mon Mar 27, 2017 9:39 am

Hi, does anyone by chance have an STL file of the Z-clamps that hold the Z axis in place for transportation? I would need to print one pair, as we threw away ours after unpacking the N2 printer.

If someone still has them, it would even be great to get just the measurments and I can create the 3D model myself.

Online
User avatar
Vicky@Raise3D
Posts: 2291
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Fri Mar 31, 2017 2:26 am

Sorry, but I don't have stl file on hand.
But have gcode file of it. It was sliced with ABS.
Z Clamps for N2.rar
(3.55 MiB) Downloaded 30 times

itehlab
Posts: 17
Joined: Thu May 26, 2016 12:56 pm

Re: STL Design Shared

Postby itehlab » Wed Apr 12, 2017 7:57 am

Hi Vicky, thank for sharing, but the file contains 20 clamps, so it was a bit too much for us :)

We made a new STL model (it's a bit tight compared to the original) which I'm sharing in attachment.
Attachments
z_axis_clamp.stl
(28.4 KiB) Downloaded 26 times

Online
User avatar
Vicky@Raise3D
Posts: 2291
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Wed Apr 12, 2017 10:41 am

Thanks for your sharing.

User avatar
SteveWallin
Posts: 15
Joined: Sun Mar 26, 2017 2:20 pm

Re: STL Design Shared

Postby SteveWallin » Wed Apr 19, 2017 12:49 am

Another fan duct: http://www.thingiverse.com/thing:2258157

I ditched my second hot-end in favour of good GCode controllable cooling. This fan duct is a remix of Socke's, modified to blow closer to the print.

IMG_6178.JPG


Shown here in Raise PLA to test it out. So far so good, i'm getting the cooling I need to print small, fine detailed objects.

EldRick
Posts: 106
Joined: Thu Jun 22, 2017 5:55 am

Re: STL Design Shared

Postby EldRick » Sun Jul 09, 2017 4:12 pm

And please add this remix of the ducted electronics cover for more reliable printing: http://www.thingiverse.com/thing:2425721
Image

firesped
Posts: 699
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Fri Jul 14, 2017 2:17 am

any chance we can get the STL file shared for the X Axis End stop mounting part? mine is weaken from a hard hit a long time ago and keeps working itself loose. I would like to make another.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

Online
User avatar
Vicky@Raise3D
Posts: 2291
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Fri Jul 14, 2017 5:54 am

firesped wrote:any chance we can get the STL file shared for the X Axis End stop mounting part? mine is weaken from a hard hit a long time ago and keeps working itself loose. I would like to make another.


EndStop Shim-7mm.STL
(262.75 KiB) Downloaded 20 times

firesped
Posts: 699
Joined: Mon Mar 21, 2016 9:23 pm
Location: Tucson, AZ

Re: STL Design Shared

Postby firesped » Fri Jul 14, 2017 7:03 pm

Thank you for the file. However, I need the EndStop shim for the Kickstarter EB printer. If it is not available, I will just have to recreate it.
RL name: Michael Nolen
printers:
raise3D N2 kickstarter Early Bird
Trinus Deluxe (running smoothieware on Azteeg X5 GT board)
Monoprice Maker Select v2

Online
User avatar
Vicky@Raise3D
Posts: 2291
Joined: Fri Mar 25, 2016 3:54 am

Re: STL Design Shared

Postby Vicky@Raise3D » Mon Jul 17, 2017 8:03 am

Not the file I shared?
Would you like to share me a picture about that?


Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests