163 days of print time on N2

Thoughts about Raise3D, 3D printing and making in general.
checktest
Posts: 57
Joined: Fri May 13, 2016 5:35 pm

163 days of print time on N2

Postby checktest » Thu Dec 14, 2017 8:31 pm

Dashboard is up to 100 days of print time! That machine really has an additional 1500 hours on it before the Dashboard and print time tracking feature were implemented. So actual total is closer to 163 days print time. Also another 18 days on my newer N2 Plus.

There's probably a lot of you that have me beat, but I just thought it was cool and so figured I'd share. It's not been without some issues and tinkering, but it has still been quite a workhorse.
Attachments
IMG_20171214_131241.jpg

User avatar
Michael.P@Raise3D
Posts: 225
Joined: Wed Jul 20, 2016 4:51 pm
Location: Costa Mesa
Contact:

Re: 163 days of print time on N2

Postby Michael.P@Raise3D » Thu Dec 14, 2017 9:36 pm

Welcome to the 100 day club, it is good to have another member among our ranks!
Michael Petitclerc, Technician
Tel: +888 963 9028
Web: http://www.raise3d.com

User avatar
Allan Sche Sar
Posts: 23
Joined: Fri Aug 11, 2017 10:56 am
Location: Germany

Re: 163 days of print time on N2

Postby Allan Sche Sar » Tue Jan 02, 2018 11:26 am

How can I activate the Dashboard? My dashboard say after 7 month zero g :(

User avatar
Vicky@Raise3D
Posts: 3618
Joined: Fri Mar 25, 2016 3:54 am

Re: 163 days of print time on N2

Postby Vicky@Raise3D » Tue Jan 02, 2018 11:38 am

Which version of touchscreen firmware are you using? Did you wait until the Done button jump out after printing complete? When the completely finished print task will be recorded in dashboard.

User avatar
Allan Sche Sar
Posts: 23
Joined: Fri Aug 11, 2017 10:56 am
Location: Germany

Re: 163 days of print time on N2

Postby Allan Sche Sar » Tue Jan 02, 2018 11:47 am

Since 1 h I use the firmware version 1.1.6 and 0.9.2. Befor I used 1.1.1 and 0.7.2.
Yes I wait and press done.
I make a new test again (results in 0:45 hours). The setting "Collect Print Statistic" is active.

User avatar
Allan Sche Sar
Posts: 23
Joined: Fri Aug 11, 2017 10:56 am
Location: Germany

Re: 163 days of print time on N2

Postby Allan Sche Sar » Tue Jan 02, 2018 1:05 pm

Okay it runs.

@checktest nice statistic ;)


Return to “General”

Who is online

Users browsing this forum: No registered users and 3 guests