Static (Fixed) IP Address

Thoughts about Raise3D, 3D printing and making in general.
Posts: 2
Joined: Fri Mar 10, 2017 8:21 pm

Static (Fixed) IP Address

Postby Stevec121 » Sun Aug 27, 2017 10:44 am

Hi All

Is it possible to set a fixed UP address to a Raise3D N2 Plus printer - if yes then how do you do it?

Posts: 72
Joined: Thu May 12, 2016 3:47 pm

Re: Static (Fixed) IP Address

Postby Phife » Sun Aug 27, 2017 3:16 pm

Most modern routers allow you to set a static IP address for a device. Simply log into your Routers interface and find out where you can set it as static. You can usually do it from the list of connected devices, on mine I select the device from the list and set it to static IP.

User avatar
Posts: 3618
Joined: Fri Mar 25, 2016 3:54 am

Re: Static (Fixed) IP Address

Postby Vicky@Raise3D » Tue Aug 29, 2017 6:17 am

Disable the DHCP option in Ethernet tab and hand input the IP address you want to set for this machine.
In case the affect from Wifi, we would recommend to disable Wifi option as well during using Static Ip Address.

Return to “General”

Who is online

Users browsing this forum: No registered users and 5 guests