Touch screen nozzle set

Thoughts about Raise3D, 3D printing and making in general.
Sergio MT
Posts: 6
Joined: Thu Apr 20, 2017 3:16 am

Touch screen nozzle set

Postby Sergio MT » Thu Apr 20, 2017 4:48 am

Hello, I am just starting to use my Raise 3D N plus. In the touch screen interface, in the utilities menu in the far right part next to the z axes movement adjustment, there is an icon for L and R nozzles. Is this for adjusting the height of the nozzles from the touchscreen? If so, when I select the adjustment (10 mm or 1mm) is the selected nozzle supposed to move up and down?

Thanks

User avatar
Vicky@Raise3D
Posts: 2550
Joined: Fri Mar 25, 2016 3:54 am

Re: Touch screen nozzle set

Postby Vicky@Raise3D » Thu Apr 20, 2017 5:27 am

Nope, not for moving nozzle height, but for loading or unloading. If + it will load filament, if - it will unload filament.
Note: only when nozzle temperature above 170C, the extruder motor will start moving.

Sergio MT
Posts: 6
Joined: Thu Apr 20, 2017 3:16 am

Re: Touch screen nozzle set

Postby Sergio MT » Sat Apr 22, 2017 3:08 am

Ok, Thank You very much Vicky


Return to “General”

Who is online

Users browsing this forum: Vicky@Raise3D and 1 guest