Weight of the 2N just the Printer

Thoughts about Raise3D, 3D printing and making in general.
Redron357
Posts: 10
Joined: Wed Mar 01, 2017 1:37 am
Location: Oshawa Canada

Weight of the 2N just the Printer

Postby Redron357 » Wed Mar 01, 2017 1:44 am

I don't care about the shipping weight I have it now in my house, I was looking to purchase a table to sit it on and I need to know the printer weight. any one have any ideas

User avatar
Vicky@Raise3D
Posts: 4563
Joined: Fri Mar 25, 2016 3:54 am

Re: Weight of the 2N just the Printer

Postby Vicky@Raise3D » Wed Mar 01, 2017 6:55 am

Do you mean N2?
The weight of N2 is about 40kg.

Redron357
Posts: 10
Joined: Wed Mar 01, 2017 1:37 am
Location: Oshawa Canada

Re: Weight of the 2N just the Printer

Postby Redron357 » Thu Mar 02, 2017 10:57 pm

yes thank you

newraiseuser
Posts: 94
Joined: Thu Feb 01, 2018 2:58 am

Re: Weight of the 2N just the Printer

Postby newraiseuser » Tue Mar 13, 2018 3:42 am

Hi Vicky, I am in the same boat. Could you please let us know the weight of the N2 plus?

User avatar
Vicky@Raise3D
Posts: 4563
Joined: Fri Mar 25, 2016 3:54 am

Re: Weight of the 2N just the Printer

Postby Vicky@Raise3D » Tue Mar 13, 2018 6:26 am

N2 Plus with fully-packaged is 65kg. Without packaging is 49kg.

zemlin
Posts: 380
Joined: Sat Oct 21, 2017 2:02 pm

Re: Weight of the 2N just the Printer

Postby zemlin » Tue Mar 13, 2018 12:42 pm

IMHO, weight isn't the real issue, but stability while the printer is in operation. A table rated for well over the machine weight might still wiggle like jello when printing.

DeftCAD
Posts: 41
Joined: Wed Dec 20, 2017 11:15 am

Re: Weight of the 2N just the Printer

Postby DeftCAD » Tue Mar 13, 2018 12:56 pm

zemlin wrote:IMHO, weight isn't the real issue, but stability while the printer is in operation. A table rated for well over the machine weight might still wiggle like jello when printing.


I think the same. It all makes for resonance, right? I made a shelf in the corner of my office from some leftover kitchen worktop - it's 40mm thick solid Beech, so nice and heavy. That's fastened down to batons on two brick walls, with the furthest corner supported by a leg down to the floor. I made the shelf 860mm from floor level, which for me (5'10" ish) is a nice height when setting up, checking or removing prints. I also added a small piece of the dense packing foam the machine came in near the top, which made a surprising difference in damping down movement.

newraiseuser
Posts: 94
Joined: Thu Feb 01, 2018 2:58 am

Re: Weight of the 2N just the Printer

Postby newraiseuser » Fri Mar 16, 2018 7:03 pm

Vicky@Raise3D wrote:N2 Plus with fully-packaged is 65kg. Without packaging is 49kg.


Thanks


Return to “General”

Who is online

Users browsing this forum: No registered users and 6 guests