I started printing with PETG from the Raise store...This is probably the best material I have ever printed. Granted i haven't strayed from the filament path too far, but so far this PETG is hands down the best i have ever printed.
Extruder Temp: 265c
Bed Temp: 80c
First Layer speed: 15mm/sec
Normal print speed: 50mm/sec
The results are truly the best I have ever printed. The material itself is more malleable than PLA (less brittle) the slight flex combined with the strength and durability make this hard to beat. Very easy to work with and very forgiving.
Thoughts about Raise3D, 3D printing and making in general.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests