Blurred camera images on Pro2+

Thoughts about Raise3D, 3D printing and making in general.
mtvision
Posts: 5
Joined: Thu Sep 13, 2018 7:12 am

Blurred camera images on Pro2+

Postby mtvision » Mon Sep 24, 2018 3:47 pm

The camera of my Pro2+ gives blurry images. I'd like to adjust the lens. Does anyone know how to do that? I did not found any instructions yet.
Attachments
Raise3D_Pro2_Camera_unfocused.png

User avatar
Vicky@Raise3D
Posts: 4563
Joined: Fri Mar 25, 2016 3:54 am

Re: Blurred camera images on Pro2+

Postby Vicky@Raise3D » Tue Sep 25, 2018 2:01 am

You can find your camera located at right front corner above the top cover but facing to print plate.
Once you find it, please check whether the film of the camera has been removed or not. If so, you can manual rotate the bulge lens to adjust focus.

EldRick
Posts: 355
Joined: Thu Jun 22, 2017 5:55 am

Re: Blurred camera images on Pro2+

Postby EldRick » Tue Sep 25, 2018 3:41 pm

It's just a poor camera, not out of focus.


Return to “General”

Who is online

Users browsing this forum: No registered users and 5 guests