Welcome to Raisers New Home!

[jerteach]

Yes, that is biggest difference between V1 and V2, 6 or 7 fins on heat sink.
Actually newly made machines should all be V2. We have upgraded V2 early last year.

Thanks for the reply Vicky. I am new to Raise3D but not new to 3D Printing (I teach 3D Printing using a Tinkerine and my kid built a Kossel Delta). I have several minor issues with the N2 V2, but not really sure how to post them.

1. I can't seem to make a new Post?


2. I can't attach an image (I have to put the image on a website, which I can do but it seems awkward)

[NewbPilot]

Yes, that is biggest difference between V1 and V2, 6 or 7 fins on heat sink.
Actually newly made machines should all be V2. We have upgraded V2 early last year.

2. I can't attach an image (I have to put the image on a website, which I can do but it seems awkward)

When replying, under the reply box is 3 buttons, Safe Draft, Preview, and submit. Under that is an OPTIONS tab and an Attachment tab. Click the attachment tab, brows and upload the file, press PLACE INLINE, preview your post, boom, pictures

[Vicky@Raise3D]

I guess you are doing reply at Quick Reply box.
There is another opinion below called Full Editor & Preview. Inside there, you can add attachment.

If you want to establish a new thread, you need to back to http://forum.raise3d.com/ and choose a board to release you thread first. We have 7 boards currently. Then choose New Topic to start a new thread.

[jerteach]

Reminder after loading and unloading filament that the temperature does not automatically turn off. Great if you are about to print something. Not so good if you walk away and forget to set the extruder temperatures back to zero.

[Vicky@Raise3D]

We have received the advise from JohnSays. He thinks that not stopping heating does more help to him. But we still think stopping will be more safe.
We will consider to add an option for both of this. You can enable when you want to print or load or unload immediately. And disable when you only want to load or unload.

[jerteach]

We have received the advise from JohnSays. He thinks that not stopping heating does more help to him. But we still think stopping will be more safe.
We will consider to add an option for both of this. You can enable when you want to print or load or unload immediately. And disable when you only want to load or unload.

Really good idea Vicky

[chrons]

Hi Everyone! I'm one of New Raisers.... soon will opening my N2 and looking forward to use this printer.

[Vicky@Raise3D]

Welcome to join this family!