Tramming screw missing on center point

HouseMonster
Posts: 6
Joined: Tue May 22, 2018 4:18 pm

Tramming screw missing on center point

Postby HouseMonster » Wed Jul 11, 2018 3:07 pm

Checking with other Pro series owners. I have a missing center screw that pulls the bed down on the center point. All other positions have that center screw. I wanted to know if this is the case with everyone else. When Tramming my bed I have a hump in the middle of the bed because of this. Doesn't seem accurate to me. as there is a screw hole.

Korni
Posts: 91
Joined: Wed Apr 11, 2018 8:11 am

Re: Tramming screw missing on center point

Postby Korni » Wed Jul 11, 2018 6:02 pm

Picture please .... ?

HouseMonster
Posts: 6
Joined: Tue May 22, 2018 4:18 pm

Re: Tramming screw missing on center point

Postby HouseMonster » Wed Jul 11, 2018 7:10 pm

You can see compared to the other screws its missing the middle one.
Attachments
IMG_7745.JPG

Korni
Posts: 91
Joined: Wed Apr 11, 2018 8:11 am

Re: Tramming screw missing on center point

Postby Korni » Wed Jul 11, 2018 7:26 pm

Just as with me (Pro2 Plus) :roll: :-(
To photograph it would have been easier if you had the builtak plate removed, because you see the hole in the middle of the top ... ;)

HouseMonster
Posts: 6
Joined: Tue May 22, 2018 4:18 pm

Re: Tramming screw missing on center point

Postby HouseMonster » Thu Jul 12, 2018 3:32 pm

Thanks for the confirmation.


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 1 guest