Printhead Virbrating

SchMax
Posts: 32
Joined: Mon Sep 03, 2018 2:02 pm

Printhead Virbrating

Postby SchMax » Thu Nov 08, 2018 9:06 am

hello@all!

i have a new problem - after a few hours into a print, the printhead starts vibrating and there are wavy patterns in the infill... please help!

i don't know why this happens or what i can do to solve it.

I'm printing with Extrudr PLA 215°C
60°C Heatbed
Attachments
2018-11-08 10.00.06.jpg
2018-11-08 09.59.52.jpg
Raise3D Pro2
Flashforge Finder


3D Printing of Architecture Models

Online
Shelton
Posts: 273
Joined: Thu Jul 12, 2018 8:34 pm

Re: Printhead Virbrating

Postby Shelton » Thu Nov 08, 2018 9:45 am

Check the first nozzle. Is tighten or not?

SchMax
Posts: 32
Joined: Mon Sep 03, 2018 2:02 pm

Re: Printhead Virbrating

Postby SchMax » Thu Nov 08, 2018 11:49 am

it looks like th nozzle is a little loose but the screws are rally tight..
which screws do i have to tighten??
Raise3D Pro2
Flashforge Finder


3D Printing of Architecture Models

Online
Shelton
Posts: 273
Joined: Thu Jul 12, 2018 8:34 pm

Re: Printhead Virbrating

Postby Shelton » Thu Nov 08, 2018 12:02 pm

Nozzle or heat block...

SchMax
Posts: 32
Joined: Mon Sep 03, 2018 2:02 pm

Re: Printhead Virbrating

Postby SchMax » Thu Nov 08, 2018 2:10 pm

heatblock
Raise3D Pro2
Flashforge Finder


3D Printing of Architecture Models

Online
Shelton
Posts: 273
Joined: Thu Jul 12, 2018 8:34 pm

Re: Printhead Virbrating

Postby Shelton » Thu Nov 08, 2018 2:30 pm

So, modular design of hot end is a better way. Easier to maintenance...


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 2 guests