Issues printing with left hot end print quality- need help leveling both nozzles

ChrisL
Posts: 1
Joined: Mon Oct 08, 2018 4:04 pm

Issues printing with left hot end print quality- need help leveling both nozzles

Postby ChrisL » Thu Oct 25, 2018 3:28 pm

My left hot end is not printing the first layer well. Layers on top of the first look poor, but slowly get better and when the floor is completed its fine.

The problem seems to have started when I removed the right hot end to clean a clog. I think after replacing the right side I believe they became misaligned and the left is now too close or too far from the bed.

Any way to level both nozzles?

User avatar
Vicky@Raise3D
Posts: 4424
Joined: Fri Mar 25, 2016 3:54 am

Re: Issues printing with left hot end print quality- need help leveling both nozzles

Postby Vicky@Raise3D » Thu Oct 25, 2018 6:04 pm

Would you like to advise whether you have a N series printer or Pro2 series printer first?
If Pro2 series, you need to jog the nozzle down to measure the nozzle height which is not necessary on N series.


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 2 guests