Compliment for Raise3D Pro2

Ronvp
Posts: 46
Joined: Tue Jul 17, 2018 9:07 pm

Compliment for Raise3D Pro2

Postby Ronvp » Mon Sep 24, 2018 12:17 pm

Just want to share how good the PRO2 in recovering from a power failure..
During a 58 hrs!! print job, the power failed twice (Houston thunderstorms), with the first one I was around and I resumed the print job within a few minutes. For the 2nd I was not around, so by the time it restarted all the stuff was cooled down. The PRo2, recovered both times. I can not see where it started or ended..

EL Cuajinais
Posts: 217
Joined: Wed Apr 06, 2016 8:48 pm

Re: Compliment for Raise3D Pro2

Postby EL Cuajinais » Mon Sep 24, 2018 4:55 pm

Ronvp wrote:I can not see where it started or ended..

Conclusion:
It happened during infill on both occasions. ;)

zemlin
Posts: 362
Joined: Sat Oct 21, 2017 2:02 pm

Re: Compliment for Raise3D Pro2

Postby zemlin » Mon Sep 24, 2018 5:39 pm

Sounds like it might be worth investing in a UPS for your setup so restarting is not required except in the case of a lengthy outage.

Shelton
Posts: 226
Joined: Thu Jul 12, 2018 8:34 pm

Re: Compliment for Raise3D Pro2

Postby Shelton » Mon Sep 24, 2018 7:53 pm

Bot only UPS with battery and sinus voltage characteristic. It works perfectly. The unit can perform very long on 100Ah battery with inverter.

Ronvp
Posts: 46
Joined: Tue Jul 17, 2018 9:07 pm

Re: Compliment for Raise3D Pro2

Postby Ronvp » Tue Sep 25, 2018 2:00 pm

zemlin wrote:Sounds like it might be worth investing in a UPS for your setup so restarting is not required except in the case of a lengthy outage.

Already ordered and underway.. We do not have that many outages, but the UPS will be help..

Shelton
Posts: 226
Joined: Thu Jul 12, 2018 8:34 pm

Re: Compliment for Raise3D Pro2

Postby Shelton » Tue Sep 25, 2018 2:07 pm

My voltage drops very often. Very old electric infrastructure... I need it. To protect my electronic.


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 1 guest