strange clicking sound while extruder moves

Spaceloops77
Posts: 1
Joined: Sun Sep 16, 2018 1:59 am

strange clicking sound while extruder moves

Postby Spaceloops77 » Sun Sep 16, 2018 5:19 am

Hello dear community.

I have a little issue with my raise 3d n2. While extruder moves in negative X direction, I hear a strange clicking sound. Prints look okay but the sound makes me concerned.

Is there someone how had this issue before? How can I solve the problem?
Thank you for your help.

Cheers.

User avatar
Vicky@Raise3D
Posts: 4577
Joined: Fri Mar 25, 2016 3:54 am

Re: strange clicking sound while extruder moves

Postby Vicky@Raise3D » Mon Sep 17, 2018 9:53 pm

Can you identify where the sound comes from? If it only happens on X direction, from right to left, it's coupler should be located at the left rear corner.
Or whether you have tried wipe out the old lube and apply some new lube onto the shafts? Sometimes if the gantry is too stuck to move, you can hear some abnormal noise.


Return to “N Series”

Who is online

Users browsing this forum: No registered users and 1 guest