N2 Z-axis issue: cannot home, noisy

freshfish
Posts: 3
Joined: Wed Apr 06, 2016 4:07 pm

N2 Z-axis issue: cannot home, noisy

Postby freshfish » Thu Aug 02, 2018 7:26 pm

On start up the Z-axis cannot home. The two motors are constantly reversing directions and eventually the platform reached the very bottom. After a reboot, the platform is still stuck and there is huge noise.

Anyone has idea? Is the motor/driver malfunctioning or the screw/nut is bad? Thanks in advance.
Raise3D N2/V2 hotend/Boston

User avatar
Vicky@Raise3D
Posts: 3937
Joined: Fri Mar 25, 2016 3:54 am

Re: N2 Z-axis issue: cannot home, noisy

Postby Vicky@Raise3D » Fri Aug 03, 2018 12:50 am

I would recommend to start from driver first.
Please shoot a support ticket on help.raise3d.com and try under the instructions by our technicians.


Return to “N Series”

Who is online

Users browsing this forum: No registered users and 1 guest