N series camera - missing matching Raise Touch update

Jetguy
Posts: 2643
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

N series camera - missing matching Raise Touch update

Postby Jetguy » Tue Jul 31, 2018 6:24 am

So, the issue is, the Raise 3D camera is up for preorder in the store and the instructions are posted- and those instructions include screenshots of an N2 and shows Raise Touch Version 0.9.10.607 with the camera menu.
N series Camera missing Raisetouch version 0.9.10.607.jpg

Version 0.9.11 doesn't enable it.


https://cdn.shopify.com/s/files/1/1069/ ... 1718453912

Where is the correct Raisetouch version that enables camera on the N series? Obviously you had an internal version at 0.9.10 and we are now on 0.9.11 official.
Attachments
N series Camera missing.jpg

Stanislav
Posts: 45
Joined: Fri Jan 12, 2018 9:05 pm
Location: Bulgaria

Re: N series camera - missing matching Raise Touch update

Postby Stanislav » Tue Jul 31, 2018 9:34 am

I confirm, and I do not have icon of my N1
Stanislav

there is always a smarter man than you

EldRick
Posts: 307
Joined: Thu Jun 22, 2017 5:55 am

Re: N series camera - missing matching Raise Touch update

Postby EldRick » Tue Jul 31, 2018 4:23 pm

Since the camera is not shipping yet, it doesn't much matter whether the SW is there or not.

Jetguy
Posts: 2643
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: N series camera - missing matching Raise Touch update

Postby Jetguy » Tue Jul 31, 2018 4:33 pm

EldRick wrote:Since the camera is not shipping yet, it doesn't much matter whether the SW is there or not.

No, it actually does. I have an official Raise 3D camera, as well as other cameras known to work.

You can sit and wait if you want, only to discover not unlike the filament detector and other recent fiascos where they played that game and held back a software required to make a hardware operate, only to find bugs and errors in the version released under rush.

There is no technical reason for them to hold back this raise touch update, or lock the current version so camera only functions on a Pro2 or Pro2 Plus. Again, users have waited for a promised camera since the Kickstarter.

Alex M.
Posts: 136
Joined: Tue Apr 10, 2018 4:59 pm

Re: N series camera - missing matching Raise Touch update

Postby Alex M. » Tue Jul 31, 2018 9:19 pm

I often check the site and download the files just to have them. I don't have a Raise Touch Version 0.9.10.607 but I do have a Raise Touch Version 0.9.10.601. I don't know if I ever actually loaded it or not but I have never seen a Camera tab.

I just check and found that I have copies of Version 0.9.10.601 and 0.9.9.509 which aren't on the downloads page. :?

Jetguy
Posts: 2643
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: N series camera - missing matching Raise Touch update

Postby Jetguy » Wed Aug 01, 2018 3:47 am

Now, if only we had both a cloud and a camera enabled Raise touch version.........
viewtopic.php?f=3&t=10077

All the more reason the camera for N series is important.

Camera enabled cloud view.jpg

Stanislav
Posts: 45
Joined: Fri Jan 12, 2018 9:05 pm
Location: Bulgaria

Re: N series camera - missing matching Raise Touch update

Postby Stanislav » Sat Aug 04, 2018 5:18 am

I have a feeling that rais ignore us ,respond only when they want
Stanislav

there is always a smarter man than you


Return to “N Series”

Who is online

Users browsing this forum: No registered users and 1 guest