Search found 189 matches

by Michael
Sat Sep 10, 2016 6:17 pm
Forum: General
Topic: big spool
Replies: 6
Views: 1335

Re: big spool

We run all of our filament spools, upto 10kg, above our N2.
by Michael
Fri Sep 09, 2016 4:44 pm
Forum: General
Topic: Annealing your prints?
Replies: 3
Views: 1823

Re: Annealing your prints?

I leave them on the build plate, and place in the oven, turn heat to 100c, for an hour, then let it cool down naturally.

Make sure you don't place them on a heat reflective surface, like a metal cookie sheet.
by Michael
Fri Sep 09, 2016 4:36 pm
Forum: Hardware
Topic: Fan died
Replies: 5
Views: 1595

Re: Fan died

You can order the Delta Electronics AFB series directly from Digikey if here in the US

Try 603-1511-ND (slightly quieter, due to lower RPM) or 603-1128-ND

https://www.digikey.com/product-detail/ ... ND/2560635
by Michael
Wed Aug 31, 2016 6:31 pm
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

Thanks for sharing the info Lyle.

We are improving the cut quality, by changing from the Amada 4000w laser to a FLOW water jet.
by Michael
Mon Aug 29, 2016 1:07 pm
Forum: Hardware
Topic: LCD screen burn in
Replies: 50
Views: 7504

Re: LCD screen burn in

Well considering the R3d price point, it's a trade off I'm sure. It's not an issue for me until I turn it off & I examine the display. I guess it will be a year or two before it becomes a real display degradation issue, and it may never be a show stopper. Maybe by then R3D could have an upgraded...
by Michael
Sun Aug 28, 2016 12:29 pm
Forum: General
Topic: Raise3D Kudos
Replies: 2
Views: 731

Raise3D Kudos

I just wanted to take a moment and say how much I really appreciate the work, care & listening to the owner community that each of the Raise3D staff is doing. That listening to theI firmly believe those little changes Raise3D have already done have made Raise3D the best large format printer now....
by Michael
Sat Aug 27, 2016 12:03 pm
Forum: Hardware
Topic: LCD screen burn in
Replies: 50
Views: 7504

Re: LCD screen burn in

Noticed the same thing this morning. I did expect it would happen due to the brightness since always being on & running, just didn't expect it in 60 days. I guess I should get a spare or two.
by Michael
Tue Aug 23, 2016 7:38 pm
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

Hi Folks, we have a few build plates that something didn't quite go right with the Amada laser, and have a little too much carbon scoring on just one end of one side for my liking. It was either cutting speed, power, focus or a combination. If your going to be using an adhesive surface, they will be...
by Michael
Mon Aug 22, 2016 12:50 pm
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

We thank everyone for your support of the new build plate! We're working on a new video to show the manufacturing using the Amada 4000w laser cutter and it will introduce the other co-founder. Quick update, We're waiting on heavier poly bags & a different shipping box design to reduce packing ma...
by Michael
Mon Aug 22, 2016 12:46 pm
Forum: Hardware
Topic: Is the Raise3D N2+ a good printer? (need advice asap)
Replies: 38
Views: 5846

Re: Is the Raise3D N2+ a good printer? (need advice asap)

This only applies if you're using N2/N2+ Dual extruder setup. Within S3D, the current profile has defined build plate dimension limit of 305mm x 305mm x 305mm, which on the surface seems correct....<snip> Thank you for the detailed reply. I am using an N2 Dual in S3D. So, if T0 (left) goes from 0 t...
by Michael
Sun Aug 21, 2016 10:39 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 38
Views: 7447

Re: 3dSolex Large Diameter Nozzles Tested

Trhuster wrote:
Michael wrote:What happens to the speed if you set the extrusion width to the same as the nozzle?


I have not tested that yet. Wich nozzle size would you like me to test it with?


either the 0.8 or 1.0mm, with extrusion width set the same as nozzle diameter.
by Michael
Sun Aug 21, 2016 10:01 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 38
Views: 7447

Re: 3dSolex Large Diameter Nozzles Tested

What happens to the speed if you set the extrusion width to the same as the nozzle?
by Michael
Sat Aug 20, 2016 8:46 pm
Forum: General
Topic: Anyone use Polymaker Filament
Replies: 10
Views: 1536

Re: Anyone use Polymaker Filament

We use PolyPlus & PolyMax white... 40c bed temp is working great for us, note we also feed from above. We've tested with the bed temp 40c to 65c. Once we get above 55c, adhesion is too strong, IMHO.
by Michael
Sat Aug 20, 2016 8:44 pm
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

UPDATED : Thermal Characteristics to include borosilicate glass build plate.
by Michael
Sat Aug 20, 2016 12:52 pm
Forum: Hardware
Topic: Is the Raise3D N2+ a good printer? (need advice asap)
Replies: 38
Views: 5846

Re: Is the Raise3D N2+ a good printer? (need advice asap)

What does #15 mean? Thx This only applies if you're using N2/N2+ Dual extruder setup. Within S3D, the current profile has defined build plate dimension limit of 305mm x 305mm x 305mm, which on the surface seems correct However if you use Dual extruders (T0/T1), they have different physical X 0 orig...
by Michael
Sat Aug 20, 2016 3:13 am
Forum: Others
Topic: N2 glass build plate specs?
Replies: 21
Views: 4848

Re: N2 glass build plate specs?

Thanks Michael.P! We're loving the new plate. We uploaded the video and the current captured data on the thermal characteristics for comparison. Will continue to test in between projects.
by Michael
Sat Aug 20, 2016 2:51 am
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

Here are the thermal characteristics charts of using averages from 3 runs each, with negligible deviation between the runs. Touch controller Bed Temp was set to 100c, Temperature of BTSN2 was measured by a Fluke Contact Temperature Probe, in the center of the build plate. on top of BuildTak sheet. B...
by Michael
Fri Aug 19, 2016 9:39 pm
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

Video of actually removing the build plate, live and removing a part. Along with doing a quick impact test of using a hammer on it.

https://vimeo.com/179515969

Please Note: The prototype build plate is shown in the video, while the production build plates are black.
by Michael
Fri Aug 19, 2016 6:36 pm
Forum: User's Gallery
Topic: 77 hours later bingo 1 guitar body
Replies: 5
Views: 2521

Re: 77 hours later bingo 1 guitar body

Cool project swampy!
by Michael
Fri Aug 19, 2016 6:32 pm
Forum: Hardware
Topic: BTSN2 Build Plate for Raise3D N2 Printers
Replies: 54
Views: 9535

Re: BTSN2 Build Plate for Raise3D N2 Printers

AR-LA - different issue, you may still need thermal pads beneath this, however the plate itself is a better thermal conductor I think, I wonder about specific heat though, i.e. glass "holds" a lot of heat so once it's hot its temperature doesn't vary much even though the heater is cycling...

Go to advanced search