Search found 19 matches

by Sebastian
Thu Feb 02, 2017 3:39 pm
Forum: General
Topic: Shipping rates
Replies: 17
Views: 1594

Re: Shipping rates

Would you be able to send your products to Amazon.de for fulfillment? That would give way better shipping rates.
by Sebastian
Sat Sep 03, 2016 10:29 am
Forum: Printing Software
Topic: ideaMaker 2.2.3 Release Note 2016.8.25
Replies: 47
Views: 5204

Re: ideaMaker 2.2.3 Release Note 2016.8.25

I've had it twice that after an update the "Printer Type" was reset to the "N2" without the "V2 Hot End". That makes it look as if the custom templates had disappeared. But after reselecting my printer, all custom templates were back.
by Sebastian
Tue May 17, 2016 12:27 pm
Forum: Hardware
Topic: WLAN not finding any networks
Replies: 13
Views: 937

Re: WLAN not finding any networks

I can't find that antenna at any of the sides. So unless it is hidden behind the white board, it must be missing. Does anybody know a source in Germany?
by Sebastian
Tue May 17, 2016 10:01 am
Forum: Hardware
Topic: WLAN not finding any networks
Replies: 13
Views: 937

Re: WLAN not finding any networks

If I had to guess, the answer is the antenna is unplugged at the LCD board. Which printer is this? N1, N2, N2 Plus? Either way, the answer is the LCD box needs opened, the antenna is tiny sticker like device with small coaxial wire and connector, and it plugs into the mainboard of the pcDuino style...
by Sebastian
Mon May 16, 2016 8:53 pm
Forum: Hardware
Topic: WLAN not finding any networks
Replies: 13
Views: 937

Re: WLAN not finding any networks

John@Raise3D wrote:Have you enable the wlan?

Yes, of course.
by Sebastian
Sun May 15, 2016 3:32 pm
Forum: Feature requests, ideas, wishes
Topic: Rotation Controls
Replies: 10
Views: 1069

Re: Rotation Controls

The word "IdeaMaker" written on the virtual platform defines the "forward" axis. I'd rather use the image with the three axes at the bottom left for the definition. When we operate the program we are sitting in the "pilot's seat" facing forward when this lettering is u...
by Sebastian
Sun May 15, 2016 12:31 pm
Forum: Feature requests, ideas, wishes
Topic: Rotation Controls
Replies: 10
Views: 1069

Re: Rotation Controls

Here's a suggestion for the rotation dialog, I think this would make it a lot easier to use:
rotation.png
rotation.png (6.08 KiB) Viewed 990 times
by Sebastian
Sun May 15, 2016 12:24 pm
Forum: Feature requests, ideas, wishes
Topic: Rotation Controls
Replies: 10
Views: 1069

Re: Rotation Controls

Julia, you need to take a closer look at the coordinates of the plane in the wikipedia image. The plane is heading in the x direction. Let me add the x / y / z to the image to make it clearer: Plane1.png Now rotate that image so it matches the idea maker coordinate system. This results in a plane th...
by Sebastian
Sat May 14, 2016 9:11 pm
Forum: General
Topic: Bed Leveling
Replies: 61
Views: 4659

Re: Bed Leveling

Hm... that Z-screw appears to be quite a challenge. Mine is bent, too. And so is the one that I got as replacement. The screw is M3x30 according to support. The only source I've found so far is this one, but I need to order 100 screws for 52 Euro: http://www.ebay.de/itm/Randelschrauben-M3x30-Stahl-g...
by Sebastian
Fri May 13, 2016 9:20 pm
Forum: Printing Software
Topic: Ideamaker Lost default Profiles for N2 V2 hotend
Replies: 9
Views: 1313

Re: Ideamaker Lost default Profiles for N2 V2 hotend

I was a bit confused, because I still had the "Raise3D N2" selected, and I only saw templates for the V1 filament types, everything else was empty. It took me a while to figure out that there is a new printer with the name "Raise3D N2 - V2 Hot End" that I need to select. Now ever...
by Sebastian
Fri May 13, 2016 9:01 pm
Forum: Hardware
Topic: WLAN not finding any networks
Replies: 13
Views: 937

Re: WLAN not finding any networks

My wlan is set to visible and signal strength should be very good at that location. My phone shows at least 5 networks at that location, so I'd expect to see at least some of them. There is only one LAN connection in that room, and I needed this for something else this week (and no unused switch lay...
by Sebastian
Fri May 13, 2016 11:41 am
Forum: Hardware
Topic: WLAN not finding any networks
Replies: 13
Views: 937

WLAN not finding any networks

Should wlan be working out of the box? When I enable wlan in the menu, it won't show any networks at all.
by Sebastian
Fri May 13, 2016 11:30 am
Forum: Printing Software
Topic: Ideamaker Lost default Profiles for N2 V2 hotend
Replies: 9
Views: 1313

Re: Ideamaker Lost default Profiles for N2 V2 hotend

I don't see any .bin files for the default profiles, only for my custom profiles.

The catch might be that the correct "Printer Type" needs to be selected, otherwise the profiles don't appear.
by Sebastian
Tue Apr 26, 2016 2:20 pm
Forum: Hardware
Topic: V2 Hot End Information and Q&A
Replies: 70
Views: 12827

Re: V2 Hot End Information and Q&A

Can anybody tell me the weight of the V2 extruder (for shipping)?
by Sebastian
Thu Mar 24, 2016 9:35 am
Forum: Printing Software
Topic: Simplify3D Offset Issue
Replies: 53
Views: 7839

Re: Simplify3D Offset Issue

Hi Andrew, you need to add some scripts to your profile. This is what I have right now: Starting Script: ; // Set extrusion factor for head 0 to 100% M221 T0 S100 ; // max accel print M201 X1000 Y1000 ; // max accel travel M202 X1000 Y1000 ; // default accel for normal moves M204 S1000 ; home all ax...
by Sebastian
Tue Mar 22, 2016 10:19 pm
Forum: Printing Software
Topic: Simplify3D Offset Issue
Replies: 53
Views: 7839

Re: Simplify3D Offset Issue

My N2 ignores all lines with a ";" after the command. Try removing that.
by Sebastian
Tue Mar 22, 2016 1:49 pm
Forum: General
Topic: New Forum Session ID
Replies: 4
Views: 474

Re: New Forum Session ID

Your cookies have the secure flag. So they only work over https, but your forum uses http. So they won't work.
by Sebastian
Tue Mar 22, 2016 5:48 am
Forum: Printing Software
Topic: Support Infill Ratio
Replies: 2
Views: 446

Support Infill Ratio

In the advanced settings I have the option to set the Support Infill Ratio. I often have the problem that I'd prefer to have a lower infill ratio in order to save time and material when printing. But then the bottom surfaces that are printed on the support are not as smooth as I would like them to b...
by Sebastian
Tue Mar 22, 2016 5:25 am
Forum: Printing Software
Topic: Setting the timezone on the Raise3D N2 by Dave Hylands
Replies: 1
Views: 264

Re: Setting the timezone on the Raise3D N2 by Dave Hylands

After setting the time, call

Code: Select all

hwclock -w
to make your changes permanent. Otherwise you'd have to do it again after turning off your printer.

Go to advanced search