Search found 345 matches

by EldRick
Mon Nov 12, 2018 5:44 pm
Forum: Hardware
Topic: what cameras work on n 2plus
Replies: 3
Views: 60

Re: what cameras work on n 2plus

Does the Logitech give any better image than the low-res R3D version?
by EldRick
Fri Nov 09, 2018 6:08 pm
Forum: Pro2 Series
Topic: 2kg spools want fit....
Replies: 3
Views: 100

Re: 2kg spools want fit....

A lot of US-made ONE-kg spools don't fit in the N2.
by EldRick
Fri Nov 02, 2018 2:34 pm
Forum: Software
Topic: Loads of New Exciting Updates available for download
Replies: 28
Views: 585

Re: Loads of New Exciting Updates available for download

That's a good reason not to buy a Pro, IMHO.
by EldRick
Thu Nov 01, 2018 5:10 pm
Forum: Software
Topic: Loads of New Exciting Updates available for download
Replies: 28
Views: 585

Re: Loads of New Exciting Updates available for download

Use Cura. It's much more powerful than iM, easy to use, and free for use.
by EldRick
Thu Nov 01, 2018 5:10 pm
Forum: Software
Topic: Does Raise3D actually use there own printers?
Replies: 15
Views: 533

Re: Does Raise3D actually use there own printers?

You will be disappointed if you buy the camera. It's pretty bad.
by EldRick
Mon Oct 29, 2018 7:33 pm
Forum: Software
Topic: Loads of New Exciting Updates available for download
Replies: 28
Views: 585

Re: Loads of New Exciting Updates available for download

I'll get "excited" if they ever update 3-year-old Marlin for the N-series.
I'm not holding my breath.
by EldRick
Sun Oct 28, 2018 4:56 pm
Forum: Hardware
Topic: BABY STEPS - Z Tuning
Replies: 5
Views: 184

Re: BABY STEPS - Z Tuning

We are certainly long overdue for a Marlin refresh on the N-series machines.
by EldRick
Fri Oct 19, 2018 5:05 pm
Forum: Hardware
Topic: Buildatk flex plate
Replies: 2
Views: 118

Re: Buildatk flex plate

Also, never lift the flex plate - slide it out of the printer without lifting, or wait until it has cooled back to room temperature. If you lift the plate while it is still hot, you will pull up on the magnets and put permanent bulges in the plastic, ruining the whole thing. Don't ask me how I know ...
by EldRick
Wed Oct 17, 2018 5:38 pm
Forum: User's Gallery
Topic: Bracket/Fix for N2 Rotating Z-Axis Ball Nuts
Replies: 16
Views: 1337

Re: Bracket/Fix for N2 Rotating Z-Axis Ball Nuts

Im printed a set also - the resulting improvement is subtle, but probable.
by EldRick
Wed Oct 17, 2018 5:36 pm
Forum: Hardware
Topic: Instructions for N-series camera confusing or wrong
Replies: 14
Views: 658

Re: Instructions for N-series camera confusing or wrong

After installing mine, I'd say disconnect the cable from the camera so you can feed the cable down from the cable chain mount, and reconnect the cable to the camera once you have it run to the filament-spool area.
by EldRick
Sun Oct 14, 2018 4:00 pm
Forum: Pro2 Series
Topic: Bed Height Adjustment Screw Slop
Replies: 6
Views: 211

Re: Bed Height Adjustment Screw Slop

The sloppy height adjustment screw is easily fixed by adding a stop-nut on the screw beneath the bracket, to fix it in place when set.
by EldRick
Fri Oct 12, 2018 4:07 pm
Forum: Software
Topic: What is the current motion controller board firmware for Raise3D N2 series ?
Replies: 3
Views: 148

Re: What is the current motion controller board firmware for Raise3D N2 series ?

1.1.6 is, of course, an obsolete elderly version of Marlin, and is long overdue for an update.
by EldRick
Tue Oct 09, 2018 5:17 pm
Forum: Software
Topic: New Idea Maker
Replies: 14
Views: 930

Re: New Idea Maker

And true Sequential printing.
by EldRick
Tue Oct 09, 2018 5:15 pm
Forum: Hardware
Topic: PEI Build Plate - Rigid Underlayer Needed on N1?
Replies: 1
Views: 96

Re: PEI Build Plate - Rigid Underlayer Needed on N1?

My .5mm PEI for N2 was certainly warped, but flattened out reasonably well when adhered to the glass buildplate.
by EldRick
Mon Oct 08, 2018 3:58 pm
Forum: Printing Settings
Topic: Now do I clean out all traces of previous material so can keep different material nozzels nozzels clean please?
Replies: 1
Views: 398

Re: Now do I clean out all traces of previous material so can keep different material nozzels nozzels clean please?

A) Do not use the material change sequence on the front panel. Leave the old filament in the nozzle when you remove it, and clear it out when you next use it, as in B). B) Instead, simply clip the current filament 1/2" above the extruder, heat the hot-end up to printing temp, and use the Utilit...
by EldRick
Mon Oct 08, 2018 12:52 am
Forum: Hardware
Topic: Camera Installation
Replies: 1
Views: 408

Re: Camera Installation

It would be a lot easier to feed the cable down the cable-chain hole from the outside first, then connect the camera once the cable is inside the printer in the spools area.
by EldRick
Tue Oct 02, 2018 4:39 pm
Forum: Feature requests, ideas, wishes
Topic: Adjusting Z height while printing
Replies: 13
Views: 925

Re: Adjusting Z height while printing

There is no hardware restricting this: all that needs to be done is for the interface to insert a gcode command to raise or drop the bed by a fraction of a mm, perhaps .02mm or so.
by EldRick
Sat Sep 29, 2018 12:57 am
Forum: Feature requests, ideas, wishes
Topic: Adjusting Z height while printing
Replies: 13
Views: 925

Re: Adjusting Z height while printing

Z-offset adjustment on the fly would be excellent and save a lot of time and restarts.
by EldRick
Fri Sep 28, 2018 10:37 pm
Forum: Hardware
Topic: Instructions for N-series camera confusing or wrong
Replies: 14
Views: 658

Re: Instructions for N-series camera confusing or wrong

On mine, no double-sided tape, the wire was already installed, and the protective lens covering was on the outside of the camera, not the inside.

The guy who writes the instructions needs to talk to the guys who make the cameras.

Go to advanced search