Search found 1790 matches

by Jetguy
Wed Nov 22, 2017 5:08 pm
Forum: Software
Topic: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13
Replies: 115
Views: 2952

Re: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13

Given that things like the power supply, the motion controller board, the LED strips, and the fans throughout the printer are not on any software controllable output, the answer is simply no, the machine is not capable of "going to sleep" in the sense of the functions many of you want (fan...
by Jetguy
Wed Nov 22, 2017 4:50 pm
Forum: Feature requests, ideas, wishes
Topic: FEATURE REQUEST Disable Touch or Disable USB
Replies: 8
Views: 93

Re: FEATURE REQUEST Disable Touch or Disable USB

You are mistaken. 1.1.1 is the Marlin motion firmware. The Raise 3D touch is the application running on the LCD and has a different version- now 0.9.2 Raisepack update. You and every other new owner needs to read this post http://forum.raise3d.com/viewtopic.php?f=3&t=1652&p=13896#p13896 Also...
by Jetguy
Wed Nov 22, 2017 2:56 pm
Forum: Feature requests, ideas, wishes
Topic: FEATURE REQUEST Disable Touch or Disable USB
Replies: 8
Views: 93

Re: FEATURE REQUEST Disable Touch or Disable USB

No, they are different passwords for totally different functions. SSH- remote administrative connection service over the network- requires password Screen Lock- local time based screen lock function requiring a completely separate password. Can you set them to the same password? Yes, but they are 2 ...
by Jetguy
Wed Nov 22, 2017 4:46 am
Forum: General
Topic: Rule for unloading filament
Replies: 3
Views: 48

Re: Rule for unloading filament

I specifically talked about this gap and it's good for new owners to understand the extruder construction and the various parts.
viewtopic.php?f=4&t=2276&p=16851&hilit=tube+gap#p16789
by Jetguy
Wed Nov 22, 2017 4:43 am
Forum: General
Topic: Rule for unloading filament
Replies: 3
Views: 48

Re: Rule for unloading filament

Specific to the Raise 3D N series, we have a small gap between the entrance of the hotend assembly and the PTFE plastic guide tube that goes through the center of the central crossing block up to the feeders on top of the system. This gap has an even larger cone shaped bore as the entrance to the ho...
by Jetguy
Wed Nov 22, 2017 4:37 am
Forum: General
Topic: Rule for unloading filament
Replies: 3
Views: 48

Re: Rule for unloading filament

I'm copying this from another forum but the question and answer explains the "why". "How do you jam an extruder by unloading filament"? When you have an extruder that has filament loaded, but has sat idle (hot) for any length of time, more than the normal distance of filament up ...
by Jetguy
Wed Nov 22, 2017 12:03 am
Forum: General
Topic: Rule for unloading filament
Replies: 3
Views: 48

Rule for unloading filament

I just had to post this in my local makerspace forum because a user jammed the N2 while unloading filament.
Unload Filament Rule.gif
by Jetguy
Tue Nov 21, 2017 5:20 pm
Forum: Software
Topic: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.
Replies: 12
Views: 124

Re: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.

OK, since you messed with the extruder and thus the breakout board, let's go over the basics because we KNOW that is the primary fault. #1, when you turn the printer on, are the extruder fans spinning? This helps indicate if you properly plugged in the ribbon cable into the extruder breakout. If the...
by Jetguy
Sun Nov 19, 2017 4:01 pm
Forum: Hardware
Topic: Project Bondtech Extruder
Replies: 707
Views: 65158

Re: Project Bondtech Extruder

It definitely should have a lever, otherwise the little target switch actuator must be perfectly aligned to the screw on the carriage that hits it. No, there are no soft limits or offsets to adjust. This is pure and simple hardware failure to trigger an endstop during homing. Ignore the wording on t...
by Jetguy
Sun Nov 19, 2017 3:58 pm
Forum: Hardware
Topic: Project Bondtech Extruder
Replies: 707
Views: 65158

Re: Project Bondtech Extruder

It definitely should have a lever, otherwise the little target switch actuator must be perfectly aligned to the screw on the carriage that hits it.

No, there are no soft limits or offsets to adjust. This is pure and simple hardware failure to trigger an endstop during homing.
by Jetguy
Sun Nov 19, 2017 3:00 pm
Forum: Others
Topic: Y axis coupler - catastrophic failure
Replies: 20
Views: 1494

Re: Y axis coupler - catastrophic failure

The "upgraded coupler" does not directly fit the printer without modification. 41DyGV9MPjL.jpg The reason is, the outer diameter of this style of coupler is much larger than the stock "spiral" type. In order to fit this coupler, it required me to use a Dremel rotary abrasive tool...
by Jetguy
Sat Nov 18, 2017 10:18 pm
Forum: Feature requests, ideas, wishes
Topic: Top Surface Ironing function
Replies: 6
Views: 519

Re: Top Surface Ironing function

Also, doing more research on this function, it would be wise to contact the original developer since there was some bad blood in how the basic idea was used in Cura. http://www.3dprintingforum.us/viewtopic.php?t=705#p9886
by Jetguy
Sat Nov 18, 2017 9:04 pm
Forum: Hardware
Topic: Project Bondtech Extruder
Replies: 707
Views: 65158

Re: Project Bondtech Extruder

No, you only do the pin swap when you find the motor rotating the incorrect way. Test first, then decide if it needs changed.
Just tight enough that you can still push the lever by hand and release the filament.
by Jetguy
Sat Nov 18, 2017 9:03 pm
Forum: Software
Topic: Pause at height when slicing with Simplify3D or other software
Replies: 30
Views: 3398

Re: Pause at height when slicing with Simplify3D or other software

Since the LCD is what handles pause here, remember it is what parses the M2000 command. The movement commands are passed to the motion board which are sent by the front panel LCD line by line. So my first thought is, it's really hard to 100% validate only from the information you shared in the above...
by Jetguy
Sat Nov 18, 2017 8:02 pm
Forum: Feature requests, ideas, wishes
Topic: Top Surface Ironing function
Replies: 6
Views: 519

Re: Top Surface Ironing function

I think the key here is not just the gcode path function, but the shape of the nozzle tip. Raise 3D nozzles are sharp and pointing with very limited flat tip area. Other brands use a fatter nozzle tip that also has more actual area surrounding the orifice, and this makes a much better smoothing func...
by Jetguy
Sat Nov 18, 2017 7:57 pm
Forum: General
Topic: Filament monitor
Replies: 77
Views: 6563

Re: Filament monitor

I'm a bit confused here on the best way forward. My first instinct was to run the absolute latest and greatest 1.2.2 because of the Marlin core source updates that went into it. In and of itself, it printed just fine for me. I really wanted to get around to testing in more detail the filament out de...
by Jetguy
Fri Nov 17, 2017 6:36 pm
Forum: Feature requests, ideas, wishes
Topic: automatic shutdown at end of print
Replies: 11
Views: 165

Re: automatic shutdown at end of print

When you say "like this", if you mean a request that is not possible since the very hardware cannot support the function?
by Jetguy
Fri Nov 17, 2017 1:57 am
Forum: Software
Topic: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.
Replies: 12
Views: 124

Re: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.

Another reason to update the Marlin firmware is that one of the fixes is to provide a more detailed error message. That way, you can not chase your tail trying to figure out which of the 2 thermocouples is not reporting. https://www.raise3d.com/pages/motion-controller-board-firmware-release-notes Ad...
by Jetguy
Fri Nov 17, 2017 12:40 am
Forum: General
Topic: Black MagiC Conductive PLA
Replies: 18
Views: 224

Re: Black MagiC Conductive PLA

No, because unless you added a print layer cooling fan, that port on the breakout is not connected to a fan. So the gcode can turn it on, but no fan connected or exists on the stock dual extruder. Now if you had the factory single extruder option, then YES, there is a layer fan in place the right ho...
by Jetguy
Fri Nov 17, 2017 12:36 am
Forum: Software
Topic: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.
Replies: 12
Views: 124

Re: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.

First, the LEFT is primary and thus when you go to single extruder the ONLY one that would work unless you then also leave the printer and software thinking you have a dual extruder. Second part is, even though you left the thermocouple either disturbing the wiring you caused a bad connection. The f...

Go to advanced search