Search found 742 matches

by firesped
Fri Dec 15, 2017 12:44 am
Forum: Hardware
Topic: E3D v6 Adaptor
Replies: 23
Views: 586

Re: E3D v6 Adaptor

personally I'm looking at getting the parts separate because i'm not sure which parts I want to get. There are multiple directions to go. you could just buy a standard kit. you could buy standard parts or you can buy the premium parts.
by firesped
Thu Dec 14, 2017 9:34 pm
Forum: Hardware
Topic: I’ve bought thermal insulation sheets and kapton tape. Now what?
Replies: 13
Views: 51

Re: I’ve bought thermal insulation sheets and kapton tape. Now what?

just run PID autotune on the touchscreen.
by firesped
Thu Dec 14, 2017 9:28 pm
Forum: Hardware
Topic: I’ve bought thermal insulation sheets and kapton tape. Now what?
Replies: 13
Views: 51

Re: I’ve bought thermal insulation sheets and kapton tape. Now what?

While you don't have to calibrate it and it will work with the pre-loaded PID settings. Those settings are not optimal in the first place as they are based on kickstarter machines and the printer has moved far past that point. Ideally, you should run PID Autotuning when you insulate the hotend as yo...
by firesped
Thu Dec 14, 2017 12:21 pm
Forum: Software
Topic: Marlin 1.1.0 Unofficial firmware version 1.2.1.1
Replies: 16
Views: 1145

Re: Marlin 1.1.0 Unofficial firmware version 1.2.1.1

if I can figure out the changes in 1.1.6, I can update it. I'm looking at doing it diffirently that will allow it to be persistant and more customizable without having to change core code.
by firesped
Thu Dec 14, 2017 10:47 am
Forum: General
Topic: Air Prints
Replies: 6
Views: 52

Re: Air Prints

hard to say without more information. If your extruder is stock, likely it is not grabbing completely onto the filament you are using and it is causing a pressure build up in the hotend.

The first question is, is your filament grinding at the gear?
by firesped
Sun Dec 10, 2017 11:36 am
Forum: Software
Topic: Marlin 1.1.0 Unofficial firmware version 1.2.1.1
Replies: 16
Views: 1145

Re: Marlin 1.1.0 Unofficial firmware version 1.2.1.1

working on the process for this. I had to create a clone of marlin 1.1.0, which I still had on the harddrive. then created branches off of that so the changes could be viewed. will have to see what they think. a lot will likely have to be redone for marlin 2.0.x
by firesped
Sun Dec 10, 2017 6:12 am
Forum: Hardware
Topic: E3D v6 Adaptor
Replies: 23
Views: 586

Re: E3D v6 Adaptor

my question on the type was because we ideally want to match what is already existing on the printer. I guess I could test it out. the E3D page for the heater cartridge states this. 12v/30w: 5-6 ohms 12v/40w: 3-4 ohms 24v/30w: 19-24 ohms 24v/40w: 9-12 ohms I'll have to grab my multimeter and see wha...
by firesped
Sat Dec 09, 2017 7:13 pm
Forum: Hardware
Topic: Thermal Runaway Error in standby?
Replies: 8
Views: 128

Re: Thermal Runaway Error in standby?

I did a pull request to merge the corrected code on GitHub. so if they merge the corrected code and release the firmware, it will finally fix the problem.
by firesped
Sat Dec 09, 2017 4:13 am
Forum: Hardware
Topic: Firmware for dummies?
Replies: 13
Views: 347

Re: Firmware for dummies?

just to point out that Raise3D firmware 1.1.6-rev1 is based on Marlin 1.0.1 or maybe 1.0.2 so no, that firmware does not have LIN_ADVANCE in it. But the good news is that the unofficial firmware based on Marlin 1.1.0 is located here. https://github.com/Firesped/Marlin-Raise3D-N-Series-Unofficial or ...
by firesped
Fri Dec 08, 2017 10:51 pm
Forum: Hardware
Topic: E3D v6 Adaptor
Replies: 23
Views: 586

Re: E3D v6 Adaptor

Which heater cartridge do we need? I know it is 24v but the 30watt or the 40watt?

Is the premium heater one to be looked at?

I am building an order for the parts I want.
by firesped
Fri Dec 08, 2017 10:06 pm
Forum: Hardware
Topic: Thermal Runaway Error in standby?
Replies: 8
Views: 128

Re: Thermal Runaway Error in standby?

raise3d should be able to just put these files into the firmware. https://github.com/Firesped/Marlin-Raise3D-N-Series/blob/1.1.7/Marlin/temperature.cpp https://github.com/Firesped/Marlin-Raise3D-N-Series/blob/1.1.7/Marlin/temperature.h I created a new branch and does pull request for these to be mer...
by firesped
Fri Dec 08, 2017 9:47 pm
Forum: Hardware
Topic: Thermal Runaway Error in standby?
Replies: 8
Views: 128

Re: Thermal Runaway Error in standby?

viewtopic.php?f=4&t=1002#p9467

This is when I started working on the debugging code and fixed this issue. we were on firmware 1.1.5 at the time.

I actually posted my debugging code in this thread. at least parts of it.
by firesped
Fri Dec 08, 2017 9:05 pm
Forum: Hardware
Topic: Thermal Runaway Error in standby?
Replies: 8
Views: 128

Re: Thermal Runaway Error in standby?

To note, I wrote massive debugging code back when this happened to figure out what was going on. part of the solution was to introduce the tr_target_temperature[heater_index] into the code base. BUT the raise3d 1.1.6 firmware does not do anything with it at all. It is still solo using target_tempera...
by firesped
Fri Dec 08, 2017 8:49 pm
Forum: Hardware
Topic: Thermal Runaway Error in standby?
Replies: 8
Views: 128

Re: Thermal Runaway Error in standby?

This happened because the code for the thermal runaway in 1.1.6 was not done correctly. please see this file in my 1.1.7 located here. https://github.com/Firesped/Marlin-Raise3D-N-Series/blob/1.1.7/Marlin/temperature.cpp the code from 1.1.6-rev1 is as folllows. temperature.cpp line 1066 void thermal...
by firesped
Fri Dec 08, 2017 8:36 pm
Forum: General
Topic: Forum moderation
Replies: 2
Views: 75

Re: Forum moderation

The forums have been hit really bad by spam a number of times in the past. It is nice to see that a system has been worked out to solve it.
by firesped
Wed Dec 06, 2017 10:14 pm
Forum: Software
Topic: Marlin 1.1.0 Unofficial firmware version 1.2.1.1
Replies: 16
Views: 1145

Re: Marlin 1.1.0 Unofficial firmware version 1.2.1.1

I made an feature request in marlin to find out if they are willing to work with adding support for the printer/touchscreen into marlin. There is a major drawback, that being the touchscreen. The issues I foresee is that since the touchscreen is closed hardware/software and also only available on th...
by firesped
Wed Dec 06, 2017 9:40 pm
Forum: Software
Topic: Touchscreen Firmware 0.9.2 Release Note 2017.06.22
Replies: 21
Views: 1499

Re: Touchscreen Firmware 0.9.2 Release Note 2017.06.22

There is an option for PID_PARAMS_PER_HOTEND in marlin firmware 1.1.0
by firesped
Wed Dec 06, 2017 9:15 pm
Forum: Software
Topic: Touchscreen Firmware 0.9.2 Release Note 2017.06.22
Replies: 21
Views: 1499

Re: Touchscreen Firmware 0.9.2 Release Note 2017.06.22

I would have to ask in the marlin firmware if you can set each to different values. Likely the raise3d 1.1.1 firmware based on 1.0.1 or 1.0.2 can not do it. There are factors that can effect them so they have different values. insulation of the hotend, different nozzles, cooling affects on the cold ...
by firesped
Wed Dec 06, 2017 9:02 pm
Forum: Others
Topic: RINGING the electromechanical challenge
Replies: 37
Views: 740

Re: RINGING the electromechanical challenge

My next question is, which firmware are you guys using as well?

That may also have a major impact on it. there could be changes in the newer firmware I did based on marlin 1.1.0 that effect things.
by firesped
Tue Dec 05, 2017 6:30 pm
Forum: Others
Topic: RINGING the electromechanical challenge
Replies: 37
Views: 740

Re: RINGING the electromechanical challenge

actually I had emailed Jetguy asking would there be any benefit to switching out the rods on the N2 to carbon fiber rods to decrease weight? His reply was No, #1 it's wear surface. Either the linear ball bearings in the center cross will destroy the surface leaving tracks or the outer ring of slidin...

Go to advanced search