Search found 24 matches

by Gwen
Tue Sep 26, 2017 5:59 pm
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

I fully agree with your thinking resteele. I could see it myself, you can pull on a point of the plate and it will no longer be in contact with the glass, therefore necessarily a bad distribution of the heater. 3 points are normally enough to define a plan like on the Ultimaker, so why 13 points? Wo...
by Gwen
Mon Sep 25, 2017 11:35 am
Forum: Hardware
Topic: Brand new N2 with unleveled bed
Replies: 6
Views: 318

Re: Brand new N2 with unleveled bed

The bed is leveled and tested at the factory. Depending on where you are the printer may be shipped multiple times. Some times the bed will require truing after transport. Here are instructions on how to True the bed. https://www.raise3d.com/pages/bed-leveling-instruction Here is a video a user did...
by Gwen
Tue Sep 12, 2017 6:43 am
Forum: Hardware
Topic: Brand new N2 with unleveled bed
Replies: 6
Views: 318

Re: Brand new N2 with unleveled bed

Hi Kes,

Sorry for you but welcome to the club !
by Gwen
Mon Sep 11, 2017 5:50 pm
Forum: Others
Topic: Members in France
Replies: 40
Views: 2342

Re: Members in France

Salut, Perso sur une machine neuve j'ai eu comme problèmes : - réalignement des axes x et y - changement des ventilateurs - que des soucis d'extrudeurs - réglage du plateau réglé en usine, sauf le mien à priori. 0,7mm de défaut dans les x et 0,4mm dans les y - changement de plateau chauffant. Il m'e...
by Gwen
Tue Jul 11, 2017 3:18 pm
Forum: Hardware
Topic: Temperature does not rise
Replies: 14
Views: 548

Re: Temperature does not rise

Ah ah, JohnSays ! You mean that everything is changing over time on a Raise3D printer. Personally I do not have time to laugh, I prefer to send everything back as my boss asked me. In addition he puts me a glue, where can I find the European standard certificate !? Can someone help me...
by Gwen
Sun Jul 09, 2017 4:11 pm
Forum: General
Topic: N2 Manual Bed Leveling Mod ???
Replies: 4
Views: 517

Re: N2 Manual Bed Leveling Mod ???

I think it should actually have a leveling kit provided with the machine since the defect is proven. It is permissible for the user to be obliged to disburse the least underneath. If this is not possible, the machine must be delivered with a good leveling. You can imagine a car dealer selling you a...
by Gwen
Fri Jul 07, 2017 8:04 pm
Forum: General
Topic: N2 Manual Bed Leveling Mod ???
Replies: 4
Views: 517

Re: N2 Manual Bed Leveling Mod ???

I think it should actually have a leveling kit provided with the machine since the defect is proven. It is permissible for the user to be obliged to disburse the least underneath. If this is not possible, the machine must be delivered with a good leveling. You can imagine a car dealer selling you a ...
by Gwen
Fri Jul 07, 2017 7:49 pm
Forum: Hardware
Topic: Temperature does not rise
Replies: 14
Views: 548

Re: Temperature does not rise

My 2 screws are also dead because they are too tight and too fragile. A simple press on the key alen and you round the impression. So, I have a head that is blocked in rotation. I think I will have to drill and tapping to the top diameter because I do not want to buy a hot end at 120 €. The list of ...
by Gwen
Wed Jul 05, 2017 9:13 pm
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

Thanks for your lake of reponse Vicky !
by Gwen
Wed Jul 05, 2017 6:32 pm
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

thanks for your answer walshlg, i'll try like that.
by Gwen
Wed Jul 05, 2017 10:57 am
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

There is an ideal bed temperature that would allow for a valid setting ?
by Gwen
Tue Jul 04, 2017 10:05 pm
Forum: General
Topic: What's this issue look like to you?
Replies: 32
Views: 2072

Re: What's this issue look like to you?

I really do not go out with me leveling the bed that was not correct to delivery, at what temperature should I heat it to achieve the best setting. I want to adjust it with the 0.2 gauge provided because no other hardware is supplied with the N2 Dual.
by Gwen
Tue Jul 04, 2017 12:50 pm
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

During the different phases that you describe to me, have you seen variations in planesite between a plateau at 20 ° and a plateau heated to 110 ° for example?
by Gwen
Tue Jul 04, 2017 12:04 pm
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

So why so many people complain about the problem, on my machine there was a default of 0.05 in X and 0.08 in Y? What happens between the factory release and the delivery to the customer? My dealer confirmed that there was a real problem on your machine! But maybe you can give me your typical IdeaMak...
by Gwen
Mon Jul 03, 2017 7:48 pm
Forum: General
Topic: Bed Leveling - N2+ (My Experience & Solution)
Replies: 15
Views: 1169

Re: Bed Leveling - N2+ (My Experience & Solution)

Have you checked the flatness of your bed at different temperatures afterwards? There are notable differences between a cold setting at 60 ° or 110 °. There is an ideal bed temperature that would allow for a valid setting. I will try your technique and if I can not, I would ask for free physical ass...
by Gwen
Thu Jun 29, 2017 3:46 pm
Forum: General
Topic: Prints Welded to Raft
Replies: 7
Views: 867

Re: Prints Welded to Raft

Hello tja, I try to print without raft but I encounter problems of grip on the board. I have however set it (the factory setting is completely false) at best, change the particular settings. Personally, I just decreased the speed / 2 and passed the flowrate at 105% for the first layer.
by Gwen
Thu May 25, 2017 8:53 pm
Forum: Hardware
Topic: Extruder stops while moving
Replies: 10
Views: 479

Re: Extruder stops while moving

Hi Vicky,

Everything is in order.

Thank you.
by Gwen
Mon May 22, 2017 4:00 pm
Forum: Hardware
Topic: Extruder stops while moving
Replies: 10
Views: 479

Re: Extruder stops while moving

I did yesterday, I look forward to the response while taking into account the jet lag. In any case it is the same problem as scienzk.

By the way, is my English understandable knowing that I use a lot (uh, all the time actually!) Google Translate?

Thank you Vicky.
by Gwen
Sun May 21, 2017 6:27 pm
Forum: Hardware
Topic: Extruder stops while moving
Replies: 10
Views: 479

Re: Extruder stops while moving

I had a slight noise when printing, so I adjusted the axes following the procedure and now I have the same problem! However, I move the extruders very easily by hand to prove that the axes are well aligned. The extruder also moves very easily in the X and Y from the tectile screen but I can no longe...
by Gwen
Mon May 15, 2017 6:57 pm
Forum: Hardware
Topic: X-axis vibration sound
Replies: 11
Views: 992

Re: X-axis vibration sound

Hello,

I have exactly the same problem as Wermy, The noise is identical. What is the best solution to solve this problem ? I shoot a ticket but i have had no answer yet, it is however urgent.

Thank you for informing me (and thank you google translation).

Go to advanced search