Search found 17 matches

by elance
Tue May 23, 2017 9:30 am
Forum: Printing Settings
Topic: Anyidea what Im doing wrong? Polymaker PC Plus and Support goes chewed up after cm or 2
Replies: 5
Views: 143

Re: Anyidea what Im doing wrong? Polymaker PC Plus and Support goes chewed up after cm or 2

Hello,

I make first parts with Polymax PC.
Bedtemp: 100C°
buidtak
Nozzle 268C°
Speed 50mm/sec.
Part dimmensions 185x60x45mm
I have mount the Fan covers.
Raft used
All dors closed

Always some warping.

Make it sence to plase the part with the small side to the plate? 60X45mm

Any ideas?

Elance
by elance
Fri May 19, 2017 7:45 am
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Re: Print stops after 30min.

Hi MariaJones,

the problem is solved after I got a sparepart from Raise.
Now it runs.

Elance
by elance
Tue Apr 25, 2017 4:59 pm
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Re: Print stops after 30min.

I got a part called Stepper driver. This I replace.
Placed top on the left side of the mainbord.
by elance
Tue Apr 25, 2017 12:19 pm
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Re: Print stops after 30min.

Problem is solved!

Thanks to the Raise support. Rachel do a very good job.
Also thanks to Mr. Schramm from OKM2000 my German dealer! Perfect help!

I got a free spare part from Raise now all is running again.
by elance
Tue Apr 25, 2017 10:10 am
Forum: General
Topic: Raise N2 plus with Bondtech
Replies: 0
Views: 149

Raise N2 plus with Bondtech

Hello, I know that some N2 was changed to Bondtech extruders. Is there someone who use S3D and has done a dualprint? My printer works fine with the Bondtech extruders and I can make a dualprint if I use Ideamaker. But I prefer S3D maybe I have some experiance with S3D and no experiance with Ideamake...
by elance
Sun Apr 23, 2017 8:17 am
Forum: Printing Software
Topic: Cura 2.4 Profiles for Raise3D
Replies: 5
Views: 662

Re: Cura 2.4 Profiles for Raise3D

Hello,

did your S3D starting code work? I look for a starting code for dualprint.
Rause N2+ with Bondtech
S3D Version 3.1.1
by elance
Sun Apr 23, 2017 8:12 am
Forum: Printing Software
Topic: Recommended settings for Simplify3D?
Replies: 7
Views: 435

Re: Recommended settings for Simplify3D?

Hello,

I also use S3D. Single parts are not a problem. If I print 2 colours I have a issue with starting the extruder.
Has somebody a starting script that runs for dual printing?

regards
elance
by elance
Mon Apr 17, 2017 8:23 am
Forum: General
Topic: dual print with S3D and Bondtech
Replies: 6
Views: 293

Re: dual print with S3D and Bondtech

Ups....

1.1.1 newest one I think.
by elance
Sun Apr 16, 2017 5:48 pm
Forum: General
Topic: dual print with S3D and Bondtech
Replies: 6
Views: 293

Re: dual print with S3D and Bondtech

no I mean 3.1.1.
by elance
Sun Apr 16, 2017 1:35 pm
Forum: General
Topic: dual print with S3D and Bondtech
Replies: 6
Views: 293

Re: dual print with S3D and Bondtech

Hello. Firmware version is 3.1.1 Full Extruder kit for Raise3D N2 Hybrid Rev 2 http://shop.bondtech.se/ec/upgrade-kits/full-extruder-kit-for-raise3d-n2-hybrid-rev-2.html Did you need more informatuions? can I make a test with the starting code from you or is there a risk of damage the printer? Regards
by elance
Sun Apr 16, 2017 11:01 am
Forum: General
Topic: dual print with S3D and Bondtech
Replies: 6
Views: 293

dual print with S3D and Bondtech

Hello, I can print with my left ectruder and also with the right one. But If I use a dualprint, I got some clicking noise from left extruder snd it doesen't run. So I think It would be a software problem into S3D. Befor I change to bondtech it works. This is my starting script for only left extruder...
by elance
Wed Mar 08, 2017 8:03 pm
Forum: General
Topic: Suddenly stopping extrusion.
Replies: 22
Views: 1208

Re: Suddenly stopping extrusion.

My nozzle is new so it looks at a other problem, tanky you for your information.
by elance
Wed Mar 08, 2017 6:57 pm
Forum: General
Topic: Suddenly stopping extrusion.
Replies: 22
Views: 1208

Re: Suddenly stopping extrusion.

Hello!

I fight with the same problem, did you fix the probem? If yes how?

Elance
by elance
Wed Mar 08, 2017 6:55 pm
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Re: Print stops after 30min.

Hello, It stops after 33h from 34h and now still nothing works. I print only PLA. new Verbatim new Raise filament new Polymaker. Diameter checked 1,72-1,74mm shut be okay ore? I print with 200,205,210,215 and 220°C no success. Speed 40-50mm Buidplate new calibrated. With gauge 0,2mm. new nozzle 0,4m...
by elance
Mon Mar 06, 2017 5:59 pm
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Re: Print stops after 30min.

I cant stop it easy! But tonight at 3:40 our time I had an Idea. All parts of my printer looking good and are clean. Same issue into both extruders. Same issue with different temps. So I went into the cellar and change the filament to an older PLA coil. And it runs the hole day and I hope it is stil...
by elance
Mon Mar 06, 2017 6:05 am
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Re: Print stops after 30min.

Hello, nozzle and all other parts are clean. Nozzle and upper throat tube has no gap. The upper throat tube is the turned parts that was assembled inside the heater block, correct? Then all shut be okay but why stops the filament. Gear is running. I shift for a test also the gearengine with a small ...
by elance
Sun Mar 05, 2017 6:14 pm
Forum: General
Topic: Print stops after 30min.
Replies: 15
Views: 762

Print stops after 30min.

Hello, i am new and my english is hopefully good enough to explain my problem. I buy a Raise N2+ 4 weeks ago. Load PLA start print it works perfect. After I has printed maybe 100h with the left extruder I also print a 45h print with the right extruder. Also perfect. then I change back to the left ex...

Go to advanced search