Search found 61 matches

by bellatrixzen
Fri Jun 08, 2018 1:22 pm
Forum: Hardware
Topic: Thermal Protector issue?
Replies: 5
Views: 301

Re: Thermal Protector issue?

Got everything updated last night, going to run a few tests tonight.

Thanks again
by bellatrixzen
Thu Jun 07, 2018 8:41 pm
Forum: Hardware
Topic: Thermal Protector issue?
Replies: 5
Views: 301

Re: Thermal Protector issue?

Thanks for response Jetguy I have the newer board with the shroud. I had to remove the locking clips on the ribbon connector that plug into the mainboard as they were full of glue. I tried to remove the glue, but I was afraid I was going to damage the mainboard (there was a ton of glue on the damn t...
by bellatrixzen
Thu Jun 07, 2018 2:53 pm
Forum: Hardware
Topic: Thermal Protector issue?
Replies: 5
Views: 301

Thermal Protector issue?

I finally installed the thermal protector that was sent to me by Raise3D into the N2+. I ran a 36 hour print (it printed great) but noticed that after the print finished, the left nozzle temp was indicating 209 (I printed at 215) with the set point at 0 degrees. The print had finished in the middle ...
by bellatrixzen
Tue Feb 27, 2018 3:26 pm
Forum: User's Gallery
Topic: Traditional flute and case.
Replies: 8
Views: 1030

Re: Traditional flute and case.

Very nice, and the picture composition is great too!
by bellatrixzen
Tue Nov 14, 2017 1:49 pm
Forum: User's Gallery
Topic: Warp Core/Game Room deco
Replies: 7
Views: 1009

Re: Warp Core/Game Room deco

@woofy I used two LED strips I bought on Amazon : https://www.amazon.com/dp/B074TDLXPT/ref=nav_timeline_asin?_encoding=UTF8&psc=1 Each strip has a "universal" remote that can be paired to control only one strip, so I can change the patterns of the LED's individually. There are 366 diff...
by bellatrixzen
Mon Nov 13, 2017 3:07 pm
Forum: User's Gallery
Topic: Warp Core/Game Room deco
Replies: 7
Views: 1009

Re: Warp Core/Game Room deco

Part Two: IMG_20171109_174754105.jpg IMG_20171111_084648756.jpg IMG_20171103_164639536.jpg Here is the video: https://www.youtube.com/watch?v=99j0pvadybs It is all supported with aluminum tubing and steel threaded rod secured with a silicone adhesive. .2mm layers, All PLA, total print time of 374 ho...
by bellatrixzen
Mon Nov 13, 2017 3:03 pm
Forum: User's Gallery
Topic: Warp Core/Game Room deco
Replies: 7
Views: 1009

Warp Core/Game Room deco

I have always wanted a game room/home arcade in my house. I finally was able to "get started" on it. Thought I would post some pictures as I have used the Raise3D N2+ to print all of the sci-fi or arcade decorations in the room. These are all just arcade oriented items, all available on th...
by bellatrixzen
Fri Oct 20, 2017 7:09 pm
Forum: User's Gallery
Topic: Single extruder multiple color using the Mosaic Palette
Replies: 101
Views: 17200

Re: Single extruder multiple color using the Mosaic Palette

What Jetguy said. Also, the filament getting stuck in the scroll wheel: Happens to me 6 out of every 10 prints. I just watch it and when filament first comes into scroll wheel housing, I wiggle the incoming ptfe tube a bit while putting pressure on the magnet and it will pop into place and continue...
by bellatrixzen
Mon Oct 09, 2017 2:04 pm
Forum: User's Gallery
Topic: Multiple painted prints
Replies: 3
Views: 1069

Re: Multiple painted prints

Very nice work!!
by bellatrixzen
Wed Oct 04, 2017 12:02 am
Forum: User's Gallery
Topic: Full size R2 D2
Replies: 12
Views: 2441

Re: Full size R2 D2

ahhhhhhh, so cool :) I'm watching your progress, deciding if I want to take the jump. Always wanted to print a full size R2 unit.
So very cool.......
Nice work!
by bellatrixzen
Tue Oct 03, 2017 1:50 pm
Forum: User's Gallery
Topic: Full size R2 D2
Replies: 12
Views: 2441

Re: Full size R2 D2

Very nice! The clear pieces-are those SLA printed?
by bellatrixzen
Thu Sep 28, 2017 2:59 pm
Forum: User's Gallery
Topic: Single extruder multiple color using the Mosaic Palette
Replies: 101
Views: 17200

Re: Single extruder multiple color using the Mosaic Palette

What Jetguy said. Also, the filament getting stuck in the scroll wheel: Happens to me 6 out of every 10 prints. I just watch it and when filament first comes into scroll wheel housing, I wiggle the incoming ptfe tube a bit while putting pressure on the magnet and it will pop into place and continue ...
by bellatrixzen
Sat Sep 16, 2017 6:46 pm
Forum: User's Gallery
Topic: Model printed on N2+ in Simply 3D print contest
Replies: 2
Views: 1073

Re: Model printed on N2+ in Simply 3D print contest

ha! thats cool! I remember those from when I was a kid!
Nice work!
by bellatrixzen
Sat Sep 09, 2017 4:49 pm
Forum: User's Gallery
Topic: Full size R2 D2
Replies: 12
Views: 2441

Re: Full size R2 D2

So very cool... Please keep the updates coming!
by bellatrixzen
Mon Aug 21, 2017 8:29 pm
Forum: User's Gallery
Topic: Single extruder multiple color using the Mosaic Palette
Replies: 101
Views: 17200

Re: Single extruder multiple color using the Mosaic Palette

@brennanfoo I cut down the 4mm(OD) clear tube that came with my raise to 175mm and couple it to the Mosaic tube with a 4mm to 5.75mm coupling I printed. Keep in mind I am using a bondtech directdrive hybrid, so the tall Raise3D extruder riser that comes with the N2+ Dual is not in use and will alter...
by bellatrixzen
Sun Aug 20, 2017 2:09 pm
Forum: Hardware
Topic: Power back up for raise 3d n2 plus
Replies: 5
Views: 1558

Re: Power back up for raise 3d n2 plus

Heh, A local K-Mart my company was remodeling years ago was replacing it rather than putting new cells into it, so I took it apart and popped it into my basement to run my radios and computers and just look really cool. And it did, but it was also pretty loud so I always had to have headphones on to...
by bellatrixzen
Sat Aug 19, 2017 11:48 pm
Forum: General
Topic: Dual extrusion prints
Replies: 4
Views: 1361

Re: Dual extrusion prints

Hi there! Dual extrusion. Yes. I have a N2+ dual, and it performs the same as my Qidi Tech 1 dual for dual extrusion prints. Albeit the N2 at higher resolution etc etc. Here's the deal with dual extrusion. It works, but it is always gonna be messy. Getting supports off when u print with solubles? Ye...
by bellatrixzen
Sat Aug 19, 2017 7:25 pm
Forum: Hardware
Topic: Power back up for raise 3d n2 plus
Replies: 5
Views: 1558

Re: Power back up for raise 3d n2 plus

John is correct. I am using a small APC UPS just to protect against brownouts and quick power blips. The most I have seen the N2+ pull is 486 watts. That is running one extruder heater, the heated bed, x+y steppers, and controllers. That does not include the two LED strips for lighting as mine are d...
by bellatrixzen
Thu Aug 17, 2017 8:37 pm
Forum: User's Gallery
Topic: Single extruder multiple color using the Mosaic Palette
Replies: 101
Views: 17200

Re: Single extruder multiple color using the Mosaic Palette

@brennanfoo here they are- Bender and the fish

And thanks for pushing out the update. Jetguy is right. The blobs are a bit of a pain. Will be updating immediately!
Are Jetguys Raise3D gcode fixes incorporated to this build??

IMG_20170816_114039169_HDR.jpg



IMG_20170815_073637778.jpg
by bellatrixzen
Wed Aug 16, 2017 3:34 pm
Forum: User's Gallery
Topic: Single extruder multiple color using the Mosaic Palette
Replies: 101
Views: 17200

Re: Single extruder multiple color using the Mosaic Palette

Excellent information. I'm going to rebuild my hotend today, and try to get the Raise going again.
The qidi however, is turning out amazing prints.. Just about finished with a couple of the clownfish, and printed a Bender (futurama) the other day.

Go to advanced search