Search found 220 matches

by lami3d
Sat Oct 07, 2017 8:55 am
Forum: Printing Settings
Topic: Colorfabb XT-CF20 for 40h print
Replies: 20
Views: 575

Re: Colorfabb XT-CF20 for 40h print

i didn't do that because i use these nozzles with abrasive material http://olssonruby.com/ I asked olssonruby if it's possible to add filet to their design but they don't do for the moment. But it seems to work well. Maybe i 'm going to try to polish a brass nozzle when i print XT clear. For XTCF20,...
by lami3d
Fri Oct 06, 2017 5:40 pm
Forum: Printing Settings
Topic: Colorfabb XT-CF20 for 40h print
Replies: 20
Views: 575

Re: Colorfabb XT-CF20 for 40h print

Hi, first, you have to get a hardened nozzle (like ruby for example) to can resist to 40h print with abrasive filament. i've also plastic sticking on the nozzle with xt-cf20 (and also XT clear), i found this : you have to break the angle by polishing it) 1458297480-post1.jpg Results seems very good ...
by lami3d
Sat Sep 30, 2017 8:44 am
Forum: Hardware
Topic: How to quiet Noisy Fans?
Replies: 10
Views: 676

Re: How to quiet Noisy Fans?

Hello, a good change i made is to replace main board fan and power fan (under the printer) by this one (chris67 from france design at this page to see pictures https://www.lesimprimantes3d.fr/forum/topic/5140-d%C3%A9but-sur-raise3d-n2/?page=2&tab=comments#comment-69199 ) https://www.materiel.net...
by lami3d
Mon Jul 03, 2017 11:29 pm
Forum: User's Gallery
Topic: Fantasy Castle
Replies: 7
Views: 851

Re: Fantasy Castle

magnifique !
I think it's the most beautiful..
I want to try to do the same now !
did you use additioonnal object cooling on this one ?
by lami3d
Sat Jun 03, 2017 11:40 am
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

Je suis d'accord, ça dépend un peu sur quoi tu tombes, la qualité est assez aléatoire pour le moment Perso, j'ai du changer les 6 axes + la tête et les roulement et les 4 chariots sur ma N2+ pour avoir une machine qui fonctionne comme mon autre N2 telle qu'elle est arrivée... De plus, il y a des amé...
by lami3d
Thu Jun 01, 2017 1:50 pm
Forum: Hardware
Topic: Bondtech BMG upgrade for the N series
Replies: 171
Views: 10576

Re: Bondtech BMG upgrade for the N series

Tx Socke and Jetguy, i didn't see it
by lami3d
Thu Jun 01, 2017 9:26 am
Forum: Hardware
Topic: Bondtech BMG upgrade for the N series
Replies: 171
Views: 10576

Re: Bondtech BMG upgrade for the N series

you have to change it in the firmware if you want to load with the good steps/mm
by lami3d
Thu Jun 01, 2017 9:24 am
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

Bonjour Ugo, j'ai donné mon avis sur le PVA/PLA avec la raise3d juste au dessus avec le lien du topic qu'a ouvert la marque pour montrer les réglages qui marchent. Essaie déjà avec ça. Après, j'ai un peu laisser tomber cela car je ne trouve pas que la machine soit la mieux pensée pour réaliser cela....
by lami3d
Tue May 30, 2017 2:27 pm
Forum: Hardware
Topic: Bondtech BMG upgrade for the N series
Replies: 171
Views: 10576

Re: Bondtech BMG upgrade for the N series

Tx Jetguy for the weight !
I have other questions :
- is the left extruder do the same job (once calibrated with steps) than the mini bontech upgrade (cause i'm very happy with this) ?
- is the right extruder as good as the lefty one ?

Tx for your subjective point of view on this ?
by lami3d
Tue May 30, 2017 9:52 am
Forum: Hardware
Topic: Bondtech BMG upgrade for the N series
Replies: 171
Views: 10576

Re: Bondtech BMG upgrade for the N series

Hello Dorbar, Yes, you have to realign the rods first, i had gave instructions from my experiences to get perfect square with rods http://forum.raise3d.com/viewtopic.php?f=4&t=1613 After, you can slightly move the X limit switch if necessary to get much room by playing with weldings... i hope yo...
by lami3d
Tue May 30, 2017 8:44 am
Forum: Printing Settings
Topic: Taulman Bridge Profile
Replies: 1
Views: 215

Re: Taulman Bridge Profile

Like Taulman advices

250/45°C with PVA glue on bed and no objet cooling
3.9mm and 50mm/s retraction
40mm/s and 25% first layer and 50% outline perimeter

but you have to dry it if you hear "pops" when it extrudes
by lami3d
Tue May 30, 2017 8:35 am
Forum: User's Gallery
Topic: Thor Hammer/Captain America Shield
Replies: 7
Views: 1026

Re: Thor Hammer/Captain America Shield

Hello Rob,

it's brillant work ! your finishing work is impressive in the videos !
by lami3d
Mon May 29, 2017 7:41 am
Forum: User's Gallery
Topic: Raise3D did it!
Replies: 4
Views: 1137

Re: Raise3D did it!

yeah, i've just saw it too in angu's video
congrats!
by lami3d
Sun May 28, 2017 5:13 pm
Forum: Hardware
Topic: Hot end will not sense that it has reached the Y axis origin point
Replies: 2
Views: 247

Re: Hot end will not sense that it has reached the Y axis origin point

:( By doing that you may have bent the rods you can check it (if everything else is ajusted) like that : https://www.youtube.com/watch?v=2bdGqEA-O0o You're hitting the sliding blocks before hitting the limit switch Or the limit switch is dead. When you press it with your finger, do you hear a "...
by lami3d
Sun May 28, 2017 4:54 pm
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

Bonjour Olivier, j'ai essayé le M-PVA avec succès mais le mixte PVA/PLA ne m'a jamais paru propre avec cette machine et ça a fini par me gonfler... Si tu veux t'amuser un peu avec ça, Raise a (re)(re)(re)refait des essais et semble avoir trouvé un compromis (mais ils ont mis du temps à le sortir). I...
by lami3d
Wed May 24, 2017 1:06 pm
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

"As a starting point for setting the tensions I would recommend 1.5-2 turns from fully tightened."

je retrouve pas le topic mais j'ai ça dans mes mails
by lami3d
Wed May 24, 2017 12:59 pm
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

y a un topic ou un bout de topic là-dessus
Martin les classe en tour de (dé)serrage par rapport à "serré au max" (ce qui veut dire "à fond" :mrgreen: )
perso, je fais serré au max - (entre 1.5 et 2) tours avec à peu près tout
by lami3d
Wed May 24, 2017 8:43 am
Forum: Printing Settings
Topic: Anyidea what Im doing wrong? Polymaker PC Plus and Support goes chewed up after cm or 2
Replies: 5
Views: 462

Re: Anyidea what Im doing wrong? Polymaker PC Plus and Support goes chewed up after cm or 2

i've tried ePC (not PC polymaker yet) and i would have made the same remarks as MechaMonster : i don't think you need polysupport with PC because support printed with PC will be good.

And i'm not sure polysupport can be printed in these conditions (warm closed printer)
by lami3d
Wed May 24, 2017 8:33 am
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

Ideamaker génère en plus de la retractation sur la dernière couchce (par rapport à S3D), ce qui peut conduire au même soucis rien que pour la dernière couche. Pour la phalange, y a une séquence de rétractations rapprochées (couches 90 et 91 notamment). J'essaierai si j'ai le temps d'ici ce soir mais...
by lami3d
Mon May 22, 2017 9:21 pm
Forum: Others
Topic: Members in France
Replies: 40
Views: 3303

Re: Members in France

Salut, j'ai pas eu le temps de regarder le fichier mais quand tu dis "ça accélère un peu", tu parles donc de la fin de la phalange par ex mais quels sont tes paramètres (que je puisse avoir une base pour comparer) ? Perso, j'ai pas eu de bouchage, j'ai peut-être pas imprimé de fichiers tro...

Go to advanced search