Search found 234 matches

by lami3d
Fri Jul 27, 2018 2:48 pm
Forum: General
Topic: Upgrade Components for N Series are Coming!
Replies: 14
Views: 812

Re: Upgrade Components for N Series are Coming!

Thank you very much for the explanations !
I already order to bondtech... it was a silly question

I have doubt for dual extrusion for the pro2 (one told me...) so i'm not going to take a dual extruder for the N2...
by lami3d
Fri Jul 27, 2018 1:13 pm
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 11
Views: 460

Re: N2 Touchscreen not reacting to touch on it's left side

Sorry for wasting your time. I think the support team just wants to get as much as information of your issue first, then make an analysis to see whether it is exactly a hardware problem which can only be fixed by replacing parts or some other issues we can provide any help from our side before givi...
by lami3d
Fri Jul 27, 2018 12:54 pm
Forum: General
Topic: Upgrade Components for N Series are Coming!
Replies: 14
Views: 812

Re: Upgrade Components for N Series are Coming!

Hello, i would be only interested with getting the flat motor instead of the orginal i use with my bondtech single extruder. In order to reduce the weight and to recover the whole bed (actualy, i have a fan and an heatsink at the back of the motor and so 270mm following Y axis instead of 305mm). Is ...
by lami3d
Thu Jul 26, 2018 10:44 am
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 11
Views: 460

Re: N2 Touchscreen not reacting to touch on it's left side

FYI, the LCD used is http://store.linksprite.com/1024x600-7-lvds-lcd-with-capacitive-touch-for-pcduino3/ The only difference is as supplied, the wide JST style wire slides over the standard header pins VS being a socket Again, this picture is the above linked screen direct from linksprite pcduino3_...
by lami3d
Tue Jul 24, 2018 3:43 pm
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 11
Views: 460

Re: N2 Touchscreen not reacting to touch on it's left side

Ticket submitted :)
I tried to explain the best i can and made a little history of the problems i had on my printers.
I really hope the answer will not be that touchscreen MTBF is about a little bit more than one year and that the solution is to buy a new one.
by lami3d
Thu Jul 19, 2018 2:57 pm
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 11
Views: 460

Re: N2 Touchscreen not reacting to touch on it's left side

Hello, same problem in the center at the bottom of the touchscreen on my N2 since 2 weeks... My N2 is more recent than my N2+, my N2+ doesn't have the reset button and the N2 have the reset button. But only the N2 touchscreen doesn't work anymore. After resetting, it still doesn't work. The printer...
by lami3d
Tue Jul 17, 2018 1:10 pm
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 11
Views: 460

Re: N2 Touchscreen not reacting to touch on it's left side

Hello, same problem in the center at the bottom of the touchscreen on my N2 since 2 weeks... My N2 is more recent than my N2+, my N2+ doesn't have the reset button and the N2 have the reset button. But only the N2 touchscreen doesn't work anymore. After resetting, it still doesn't work. The printers...
by lami3d
Sun May 20, 2018 3:42 pm
Forum: Hardware
Topic: Improvements by using TMC2130 driver.
Replies: 82
Views: 8332

Re: Improvements by using TMC2130 driver.

Well understood :) Thanks again !
by lami3d
Sun May 20, 2018 3:17 pm
Forum: Hardware
Topic: Improvements by using TMC2130 driver.
Replies: 82
Views: 8332

Re: Improvements by using TMC2130 driver.

Thanks a lot for this clear explanation Jetguy !
by lami3d
Sun May 20, 2018 2:10 pm
Forum: Hardware
Topic: Improvements by using TMC2130 driver.
Replies: 82
Views: 8332

Re: Improvements by using TMC2130 driver.

Thanks for this topic to all of you Sorry for John with this mistake :( I think i'm going to do this even if i never had a skipped step. I wanted to know the difference between SD5984 that Zemlin installed on his printers (see above) Vs SD2224 ? i try to compare specs but i'm not an expert of these....
by lami3d
Sun May 20, 2018 1:35 pm
Forum: General
Topic: Thermal-Protector - available soon to all
Replies: 108
Views: 25621

Re: Thermal-Protector - available soon to all

@Jetguy Yeah I figured that it may be the easiest to just cut the same pin in stead of trying to pry the little thing out probably damaging it. If it's not used anyway it's no problem. Thanks for the extensive info! Being dead honest, I'm sad they overlooked this detail as it is a problem and not e...
by lami3d
Sun May 20, 2018 12:48 pm
Forum: Software
Topic: Touchscreen Firmware 0.9.11 Release Note 2018.6.14
Replies: 85
Views: 4376

Re: Touchscreen Firmware 0.9.9 Release Note 2018.5.17

Hello, as i didn't implement firmware and touchscreen firmware since a long time because everything seems fine for me and i don't want to get a problem with lot of orders i have to print, i don't read the topics for a long time... I JUST wanted to update my printers with thermal protectors i receive...
by lami3d
Fri Apr 13, 2018 9:50 am
Forum: User's Gallery
Topic: Fortnite Battle Bus
Replies: 19
Views: 3293

Re: Fortnite Battle Bus

It's an amazing job as everything i've seen of your projects !
by lami3d
Wed Feb 07, 2018 9:17 am
Forum: Printing Settings
Topic: Raise3D ABS + XY Size compensation
Replies: 13
Views: 1299

Re: Raise3D ABS + XY Size compensation

Thank you zemlin for your explanations and files !
by lami3d
Sat Oct 07, 2017 8:55 am
Forum: Printing Settings
Topic: Colorfabb XT-CF20 for 40h print
Replies: 20
Views: 1630

Re: Colorfabb XT-CF20 for 40h print

i didn't do that because i use these nozzles with abrasive material http://olssonruby.com/ I asked olssonruby if it's possible to add filet to their design but they don't do for the moment. But it seems to work well. Maybe i 'm going to try to polish a brass nozzle when i print XT clear. For XTCF20,...
by lami3d
Fri Oct 06, 2017 5:40 pm
Forum: Printing Settings
Topic: Colorfabb XT-CF20 for 40h print
Replies: 20
Views: 1630

Re: Colorfabb XT-CF20 for 40h print

Hi, first, you have to get a hardened nozzle (like ruby for example) to can resist to 40h print with abrasive filament. i've also plastic sticking on the nozzle with xt-cf20 (and also XT clear), i found this : you have to break the angle by polishing it) 1458297480-post1.jpg Results seems very good ...
by lami3d
Sat Sep 30, 2017 8:44 am
Forum: Hardware
Topic: How to quiet Noisy Fans?
Replies: 10
Views: 1765

Re: How to quiet Noisy Fans?

Hello, a good change i made is to replace main board fan and power fan (under the printer) by this one (chris67 from france design at this page to see pictures https://www.lesimprimantes3d.fr/forum/topic/5140-d%C3%A9but-sur-raise3d-n2/?page=2&tab=comments#comment-69199 ) https://www.materiel.net...
by lami3d
Mon Jul 03, 2017 11:29 pm
Forum: User's Gallery
Topic: Fantasy Castle
Replies: 7
Views: 1785

Re: Fantasy Castle

magnifique !
I think it's the most beautiful..
I want to try to do the same now !
did you use additioonnal object cooling on this one ?
by lami3d
Sat Jun 03, 2017 11:40 am
Forum: Others
Topic: Members in France
Replies: 42
Views: 7120

Re: Members in France

Je suis d'accord, ça dépend un peu sur quoi tu tombes, la qualité est assez aléatoire pour le moment Perso, j'ai du changer les 6 axes + la tête et les roulement et les 4 chariots sur ma N2+ pour avoir une machine qui fonctionne comme mon autre N2 telle qu'elle est arrivée... De plus, il y a des amé...
by lami3d
Thu Jun 01, 2017 1:50 pm
Forum: Hardware
Topic: Bondtech BMG upgrade for the N series
Replies: 212
Views: 27093

Re: Bondtech BMG upgrade for the N series

Tx Socke and Jetguy, i didn't see it

Go to advanced search