Search found 3 matches

by jmenking
Thu Sep 21, 2017 11:15 am
Forum: Printing Settings
Topic: Print settings for 3DXTech PC/ASA
Replies: 7
Views: 359

Re: Print settings for 3DXTech PC/ASA

Update: Following setting got the "best" quality prints. I'm not happy with quality yet because of layer de-lamination. Extruder Temp: 285C, higher temp helped with de-lamination Layer height: 0.150mm Print speed: 37mm/sec HBP: 100C, glass with hairspray. Buildtak works well, too well; as ...
by jmenking
Wed Sep 13, 2017 2:34 pm
Forum: Printing Settings
Topic: Print settings for 3DXTech PC/ASA
Replies: 7
Views: 359

Print settings for 3DXTech PC/ASA

Hello,

I am beginning some test prints using 3DXTech PC/ASA filament. I will post results when I'm done, but has anyone tried a PC or PC alloy before?
by jmenking
Wed Sep 06, 2017 11:36 am
Forum: Hardware
Topic: Ventilation
Replies: 3
Views: 407

Re: Ventilation

I am also interested in venting the N2Plus to the outside of the office where I print. To calculate fan size use CFM (cubic feet per minute). Example: N2Plus enclosure is roughly 2'x2'x3'. or 12ft^3. Find a fan with a CFM rating of 12 and you will be "purging" the air in the enclosure once...

Go to advanced search