Search found 10 matches

by warrenn
Tue Nov 27, 2018 7:24 pm
Forum: N Series
Topic: Is the N2 Sold Out Because it is No Longer Being Made?
Replies: 7
Views: 220

Re: Is the N2 Sold Out Because it is No Longer Being Made?

I agree about the price point on the Pro...too much for what it actually does or better yet what it does not do...
by warrenn
Wed Oct 17, 2018 1:16 pm
Forum: Printing Settings
Topic: Bed leveling PRO PLUS 2 test or reference points
Replies: 8
Views: 257

Re: Bed leveling PRO PLUS 2 test or reference points

That is the very reason I did not buy the Pro....too much money for what it actually does or does not. Brought the Raise N2 plus instead and finally ended up making it a PLA printer only due to the bed problems causing ABS/ASA failures.
by warrenn
Tue Oct 16, 2018 7:09 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

KS_Husker, Yes ABS is very finicky. But I have been through the heat bed leveling process at 80-110C many times and all failures have been near the bed center screw area. The heat bed gets very wavy at those temperatures between the pull down screws (up to .003+). So I have narrowed it down to the h...
by warrenn
Sat Oct 13, 2018 6:27 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

Shelton, sorry I should have added that I leveled the heat bed at 110C and then Glass build plate after the heat was on for about 20 minutes for thermal expansion......
by warrenn
Sat Oct 13, 2018 6:24 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

Thanks for a reply Shelton. Yes I did that leveling the bed at 110C but it is very wavy between pull-down screws positions. I am still trying to resolve this otherwise it is a PLA only printer......
by warrenn
Fri Oct 12, 2018 6:57 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

Thanks for the reply Vicky. I am back from a job out of town now and I will be working on ABS issue soon. A raft might work but the screws are already raised up at multiple areas except for the center pull-down screw which is pulled down very far. In addition if I use a raft on a 12 inch print it wo...
by warrenn
Sat Oct 06, 2018 2:45 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

Thanks KS_Husker for a reply. Yes I have been printing ABS on my other printers but the issue I have is the bed is very wavy in high bed temperatures (80~110c) There is a problem with the center of the bed and I have checked by dial indicator many times at these temperatures leveling the bed. If you...
by warrenn
Mon Oct 01, 2018 2:05 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

Vicky, Still learning how to use this forum. In answer to your reply I use glass build plate with glue which I have used for years now. I am currently printing out a new style dial indicator mount in ABS on one of my other 3D printers and use it to relevel again the N2 glass build plate. In answer t...
by warrenn
Sat Sep 29, 2018 1:40 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

Re: ABS/ASA printing issues N2 Plus

Thanks for the quick answer. No I did not use a fan cover block. I am using glass with glue which I have been using on my other printers for years. However that is not the problem. If looking at the pictures you will see that the ABS/ASA print is not printed in the middle at higher temperatures due ...
by warrenn
Fri Sep 28, 2018 5:57 pm
Forum: Others
Topic: ABS/ASA printing issues N2 Plus
Replies: 13
Views: 1350

ABS/ASA printing issues N2 Plus

I purchased the printer on 8/2/2018 after a lot of research on the printer and it's issues. My main goal was the printing height which I needed for some projects as opposed to my 10 inch X,Y, printers which would require smaller parts glued together. Full disclosure, my other printers are Pursa styl...

Go to advanced search