Search found 2430 matches

by Vicky@Raise3D
Mon Nov 20, 2017 2:47 am
Forum: User's Gallery
Topic: Pelvis inside of a Crystal Dome
Replies: 4
Views: 61

Re: Pelvis inside of a Crystal Dome

The final result looks really good.
Also, thanks for sharing your printing tips here!
by Vicky@Raise3D
Sun Nov 19, 2017 1:37 pm
Forum: Software
Topic: Extrusion factor / E-factor with Ideamaker
Replies: 1
Views: 20

Re: Extrusion factor / E-factor with Ideamaker

Please note, you need to check the origin StepE value in the firmware of your machine first, then you can set the edited value in ideaMaker. Step per unit(mm) refers to how many steps the motor should move to push 1mm-long filament. For example, for we set this value to be 60, which means to move 10...
by Vicky@Raise3D
Sun Nov 19, 2017 12:30 pm
Forum: Others
Topic: Y axis coupler - catastrophic failure
Replies: 17
Views: 1438

Re: Y axis coupler - catastrophic failure

We are so sorry about the problem you meet. For the previous 48-hour printing, does it show any abnormal on your model, such as wobbles, shiftings which may due to the misalignment of the coupler? Shoot us a ticket, we will help check your problem and share warranty parts and instruction with you th...
by Vicky@Raise3D
Sun Nov 19, 2017 12:25 pm
Forum: Software
Topic: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.
Replies: 8
Views: 68

Re: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.

What's the full error message it displays on your screen?
After loading progress stuck during flashing, have you tried reboot the machine? After reboot, does the version number of firmware change or not?
by Vicky@Raise3D
Sun Nov 19, 2017 12:17 pm
Forum: User's Gallery
Topic: Pelvis inside of a Crystal Dome
Replies: 4
Views: 61

Re: Pelvis inside of a Crystal Dome

Did you use any special filament for support or just single nozzle to accomplish the main structure and support structure together at one time?
Do the tiny features work well with the support structure?
It is just for fun or use some other use?
by Vicky@Raise3D
Fri Nov 17, 2017 8:52 am
Forum: General
Topic: settings support
Replies: 21
Views: 386

Re: settings support

Yes, the nuts should be keep at loose state. But if too loose, during the platform moving, you will hear annoying noise from the nuts. So that we will tighten it but loose a little bit, so that it won't create too much noise.
by Vicky@Raise3D
Fri Nov 17, 2017 8:28 am
Forum: Software
Topic: Raise 3D N2 Plus "Failed to join to WLAN"
Replies: 6
Views: 96

Re: Raise 3D N2 Plus "Failed to join to WLAN"

Does reboot provide any help to this? Reboot and reconnect?
by Vicky@Raise3D
Fri Nov 17, 2017 5:28 am
Forum: User's Gallery
Topic: Engineered...
Replies: 5
Views: 250

Re: Engineered...

Does the printing result meet the customer requirement well?
by Vicky@Raise3D
Fri Nov 17, 2017 3:57 am
Forum: Software
Topic: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.
Replies: 8
Views: 68

Re: Stuck in Encoutered problem? Press here to enter Safe mode afte extruder removal.

Hi tritium, Normally we would recommend to remove the right hotend/nozzle as the left is considered to be the primary. In any event, as long as the printer has a thermocouple installed you can remove the heater rod if you like. Most of the time it is easy enough to just remove the nozzle only from ...
by Vicky@Raise3D
Fri Nov 17, 2017 2:56 am
Forum: General
Topic: Where to buy Raise3d premium PLA
Replies: 3
Views: 62

Re: Where to buy Raise3d premium PLA

Shoot us a mail to sales@raise3d.com. Let our sales team to help you find whether there is a more economic way to get the filament you want in UK.
by Vicky@Raise3D
Fri Nov 17, 2017 2:54 am
Forum: Software
Topic: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13
Replies: 107
Views: 2718

Re: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13

Hi Vicky, I would also like to have the possibility to remove unnecessary printers and some filaments installed by default. I tried to delete them from the XML configuration file but at the launch of ideamaker, they come back and polish the view! We already use a lot of brand and different filament...
by Vicky@Raise3D
Thu Nov 16, 2017 9:53 am
Forum: General
Topic: settings support
Replies: 21
Views: 386

Re: settings support

For the first question, we suggest do not move the side cooling fans to code controllable slots. Or as you have seen, the coldend of the nozzle will have no enough cooling air to keep it stay at cool status, filament will go soft too early and stuck inside the throat tube which will be hard to clean...
by Vicky@Raise3D
Wed Nov 15, 2017 3:55 am
Forum: General
Topic: New N2 Printer - Loud Fan and Dust
Replies: 7
Views: 363

Re: New N2 Printer - Loud Fan and Dust

I just purchased (2) N2 Dual Plus printers and they are both like this also. The fans are extremely loud and full of dust after less than 1 week of use. Same Here ! One of our n2 + has arrived in the same state, see worse! Our old machines that have more than one year old for some do not have as mu...
by Vicky@Raise3D
Wed Nov 15, 2017 3:20 am
Forum: Feature requests, ideas, wishes
Topic: FEATURE REQUEST Disable Touch or Disable USB
Replies: 1
Views: 47

Re: FEATURE REQUEST Disable Touch or Disable USB

We have a Screen Lock option under Setting -> Machine -> Privacy and Security.
You can set password there, so that others cannot control the touchscreen after the screen locks.
by Vicky@Raise3D
Wed Nov 15, 2017 2:31 am
Forum: Software
Topic: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13
Replies: 107
Views: 2718

Re: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13

1340 beta is out here! =) added shortcut keys! >_< (the first what I've detected) and here is some report: - should be great to see hints for commands with shortcut keys(look at my screenshot pls) scr8765.png - something strange appears after right-mouse click on buttons panel.. oh, I see!.. it's o...
by Vicky@Raise3D
Wed Nov 15, 2017 1:45 am
Forum: Software
Topic: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13
Replies: 107
Views: 2718

Re: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13

Do you mean you can't find the new printer under in this page after click Create button in Select Template page? Here is for you to choose a current printing template to copy to here. If your new printer type has no template inside, it won't be shown here. It turns out so it is impossible to just c...
by Vicky@Raise3D
Tue Nov 14, 2017 9:02 am
Forum: General
Topic: Forum error pictures linked in incorrect order in post
Replies: 6
Views: 82

Re: Forum error pictures linked in incorrect order in post

I tried to reproduce the same bug as you said. Attached 5 pictures and marked them to be 1-5. Selected and uploaded them together. 12.png Set order to be 21543 14.png Then check Preview and it shows as I defined and found the order goes wrong, from 21543 to 21534. 16.png I checked the my attach code...
by Vicky@Raise3D
Tue Nov 14, 2017 8:46 am
Forum: Software
Topic: Motion Controller FW Version 1.1.6-rev1?
Replies: 13
Views: 143

Re: Motion Controller FW Version 1.1.6-rev1?

firesped wrote:wish they had documented what they changed in M112. if I knew what it was doing, I could fix this in the 1.2.2 version.


The M112 was designed to be emergency stop code to work with Fast Stop function. But we achieve the Fast Stop function without M112, so we comment it.
by Vicky@Raise3D
Tue Nov 14, 2017 3:29 am
Forum: Software
Topic: Raise 3D N2 Plus "Failed to join to WLAN"
Replies: 6
Views: 96

Re: Raise 3D N2 Plus "Failed to join to WLAN"

In the last photo, use handphone as hotspot seems get success of connection.
Can it work with your handphone properly after successfully connected?
by Vicky@Raise3D
Tue Nov 14, 2017 2:54 am
Forum: Software
Topic: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13
Replies: 107
Views: 2718

Re: ideaMaker 3.0-beta Release Note Updated Rev. 3.0.3 2017.11.13

Hi Vicky, This is what I was talking about with the remove printer option for all printers. I dont use the V1 hotend at all but it still populates as a selection. Same with a bunch of other printers. I would like to run my printer list nice and lean so Only the printer profiles that I use populate ...

Go to advanced search