Search found 242 matches

by swampy
Sat Jun 10, 2017 9:58 am
Forum: Hardware
Topic: Where to get new rods
Replies: 5
Views: 212

Where to get new rods

Right I'm looking for new rods all round for the y axis and x axis as from day 1 I've struggled to level this bed I know the plates not flat but done mod with springs and got a 4mm glass plate as well and it always wrong in the middle . I've just been looking at my rods and you can see the blocks on...
by swampy
Sat Jun 03, 2017 7:55 pm
Forum: Printing Settings
Topic: PolyFlex & Nylon
Replies: 11
Views: 453

Re: PolyFlex & Nylon

on a ninja flex type i had to really slow down my printing speed to about 15 mm/s and that worked and i used polymaker pc nylon and with that i found 250 heat and i had 100 degrees bed but i had the bed preheating for 20 mins to half hour first so that the cabinet was nice and hot inside plus being ...
by swampy
Tue Apr 04, 2017 2:44 pm
Forum: Hardware
Topic: N2 Touch Screen Reset Button
Replies: 29
Views: 1983

Re: N2 Touch Screen Reset Button

do you have any links for the bits you brought like the button and the plug for the button please and did you have to do anything to the software or does it just reset when you press it thanks
by swampy
Thu Mar 23, 2017 5:10 pm
Forum: Hardware
Topic: Project Dual Titan Extruder
Replies: 15
Views: 923

Re: Project Dual Titan Extruder

top job that i take it it is lighter than what is fitted already
by swampy
Sun Mar 05, 2017 12:21 am
Forum: User's Gallery
Topic: and when you get the copperfil buffed right
Replies: 11
Views: 1067

Re: and when you get the copperfil buffed right

here some more
by swampy
Sun Mar 05, 2017 12:19 am
Forum: User's Gallery
Topic: and when you get the copperfil buffed right
Replies: 11
Views: 1067

and when you get the copperfil buffed right

filamentive copperpla 80% copper buffed and 1 coat ofclear laquer
by swampy
Sun Mar 05, 2017 12:16 am
Forum: User's Gallery
Topic: olaying with coppeerfill filamentive
Replies: 2
Views: 395

olaying with coppeerfill filamentive

so i got some filamentive copper fil pla 80% copper and this was my first attempt i used a cloth buffer wheel on a bench grinder printed 195 degrees 60 bed temp and think .15mm layer settings .o.5 nozzle it looks like 16999110_1854159504837049_2057700771440505988_n.jpg clay when first printed till y...
by swampy
Thu Mar 02, 2017 5:54 pm
Forum: Hardware
Topic: Psu and voltage
Replies: 2
Views: 245

Re: Psu and voltage

yes vicky thanks its some thing im helping a friend out with maybe installing a new type of heat bed thanks
by swampy
Tue Feb 28, 2017 10:16 pm
Forum: Hardware
Topic: Psu and voltage
Replies: 2
Views: 245

Psu and voltage

Hi can anyone tell me what type of psu the n2 plus uses and the voltage is the voltage 12v cheers it's to do with my heat bed thanks
by swampy
Tue Feb 28, 2017 7:50 pm
Forum: User's Gallery
Topic: Medusa chandelier
Replies: 20
Views: 1873

Re: Medusa chandelier

only 1 problem she wants one on the landing now lol thought the little pot on top to hide the wires as their is 12 of them all tinned together goes well thanks for that design im gonna try some lithio lamp shades for the bedroom with david bowie on for her
by swampy
Mon Feb 27, 2017 5:52 pm
Forum: User's Gallery
Topic: Medusa chandelier
Replies: 20
Views: 1873

Re: Medusa chandelier

here we go filnally made it but didnt print the chains as i was struggling to do them so cheated i added a pot on top as i soldered the 12 wires together and hid them underneath
by swampy
Thu Feb 02, 2017 7:21 pm
Forum: General
Topic: Polymaker filament
Replies: 9
Views: 692

Re: Polymaker filament

i had the polymaker pc plus not a problem with it its in the garage at nice cold temps as with all my stuff its in a wardrobe and ive never had any problems ive never heard any popping sounds from my prints i must be 1 lucky guy i keep meaning to move it all to the airing cupboard in the house thats...
by swampy
Thu Feb 02, 2017 7:15 pm
Forum: Others
Topic: Don't extrude at all when starting to print
Replies: 4
Views: 454

Re: Don't extrude at all when starting to print

different filaments different textures and slightly different sizes only by .1mm or .2mm plus different colours have different properties white can be bad its to do with the pigments they use to make the colour it sounds supid but the more i see the more i learn i have a snow white petg and that is ...
by swampy
Thu Jan 19, 2017 11:24 pm
Forum: General
Topic: Carbon Fiber
Replies: 13
Views: 821

Re: Carbon Fiber

Swampy, may I ask where you bought your petg + CF filament? hi ive been getting it from but i just seen it and ive made a bad mistake its pla but still good plus they have run out of the 500g rolls i ordered 2 and they sent me 1kg rolls for the price of 500g rolls so quids in https://www.technology...
by swampy
Thu Jan 12, 2017 6:48 pm
Forum: User's Gallery
Topic: Medusa chandelier
Replies: 20
Views: 1873

Re: Medusa chandelier

cheers will get some on monday from my nut and bolt store man iv almost done the arms i think i would have been better doing then with a .05mm nozzle plus found problem with the top fil i got my lid of now coooling it quicker and the fan cover off think i will do some mods later i got some covers fo...
by swampy
Tue Jan 10, 2017 6:04 pm
Forum: User's Gallery
Topic: Medusa chandelier
Replies: 20
Views: 1873

Re: Medusa chandelier

yeap plugging away think im gonna try the white petg at about 205 temp did you use screws to fix it togeather and which ones did you use thanks
by swampy
Tue Jan 10, 2017 9:10 am
Forum: User's Gallery
Topic: Medusa chandelier
Replies: 20
Views: 1873

Re: Medusa chandelier

well i tried my petg carbon and it has done the smaller arms spot on just got to figure the white petg as im doing it in black and white
by swampy
Mon Jan 09, 2017 1:50 pm
Forum: User's Gallery
Topic: Medusa chandelier
Replies: 20
Views: 1873

Re: Medusa chandelier

im using a recycled petg white i had a go at the chain section last night im going to turn my heat down to 215 and slowing speed down as well as i got up this morning and the top was messy and the chain was crumbly
its ok doing test cubes but when printing its a different game changer

Go to advanced search