Search found 212 matches

by Korni
Fri Oct 19, 2018 2:47 am
Forum: Pro2 Series
Topic: Change XYZ Home Position
Replies: 7
Views: 170

Re: Change XYZ Home Position

Vicky@Raise3D wrote:Because of the modification, you don't want the extruder to go the actual home position any more? ......

Correct. But only directly after the end of printing. When I then select "Home" on the display he should go back to the normal home position to position himself "0".
by Korni
Thu Oct 18, 2018 2:43 am
Forum: Pro2 Series
Topic: Change XYZ Home Position
Replies: 7
Views: 170

Re: Change XYZ Home Position

Because I installed a cover device & additional fan and it gets too tight when the printer goes back to the left front corner, satisfied ?! ;-) It would be better if it stopped several millimeters before.
IMG_7547.JPG
by Korni
Wed Oct 17, 2018 8:27 pm
Forum: Pro2 Series
Topic: Change XYZ Home Position
Replies: 7
Views: 170

Re: Change XYZ Home Position

No probably expressed myself wrong ... I just want to "park" AFTER a print about 40-50mm (X&Y) from the home position (front left corner) and 100mm (Z) in height. The printer should NOT move to the left front corner and only a few mm away from the print bed after printing. This also ma...
by Korni
Wed Oct 17, 2018 3:49 pm
Forum: Pro2 Series
Topic: Wifi switch off after power down
Replies: 2
Views: 30

Re: Wifi switch off after power down

Happened twice today. 2x Pro2 turned on, 2x Wlan was deactivated :-(
by Korni
Wed Oct 17, 2018 2:45 am
Forum: Pro2 Series
Topic: Wifi switch off after power down
Replies: 2
Views: 30

Re: Wifi switch off after power down

I got there and unfortunately we also....
by Korni
Wed Oct 10, 2018 7:50 pm
Forum: Software
Topic: Reslice without closing settings window. Feature request.
Replies: 3
Views: 67

Re: Reslice without closing settings window. Feature request.

Since I give you 100% right, annoying and is unproductive....
by Korni
Wed Oct 10, 2018 7:53 am
Forum: Feature requests, ideas, wishes
Topic: IdeaMaker support for 3DConnexion SpaceNavigator for Notebooks.
Replies: 28
Views: 3383

Re: IdeaMaker support for 3DConnexion SpaceNavigator for Notebooks.

Too bad .... the 3DConnexion SpaceMouse Wireless is not supported, just tested :-(
by Korni
Sat Oct 06, 2018 2:38 am
Forum: User's Gallery
Topic: 2 Color test on new air duct design for my pro2
Replies: 3
Views: 747

Re: 2 Color test on new air duct design for my pro2

Great !!!!
Please give me/us the STL ;-)
by Korni
Thu Oct 04, 2018 7:54 pm
Forum: Pro2 Series
Topic: Simple fix for better cooling
Replies: 31
Views: 881

Re: Simple fix for better cooling

THX
And for your Raise3D Pro2 Anti-HEATCREEP (HotEnd) how many, how long screws, 3mm ?
I need 2 pieces, each one for both Hotends?
by Korni
Thu Oct 04, 2018 7:24 pm
Forum: Pro2 Series
Topic: Simple fix for better cooling
Replies: 31
Views: 881

Re: Simple fix for better cooling

What new screws did I need for your front fanduct, 3mm ? How long ? 4 screws, correct?
And for your Raise3D Pro2 Anti-HEATCREEP (HotEnd) how many, how long screws, 3mm ?
by Korni
Thu Oct 04, 2018 6:01 pm
Forum: Feature requests, ideas, wishes
Topic: Feature Request #3 Imperial Units in ideamaker
Replies: 6
Views: 535

Re: Feature Request #3 Imperial Units in ideamaker

DeX wrote:inches is not a normal human measure units ! only mm! :)


:!:
by Korni
Tue Oct 02, 2018 7:10 am
Forum: Printing Settings
Topic: Just tell me what will work
Replies: 31
Views: 1539

Re: Just tell me what will work

Yes, MAC Version.
by Korni
Tue Oct 02, 2018 6:48 am
Forum: Pro2 Series
Topic: Change XYZ Home Position
Replies: 7
Views: 170

Change XYZ Home Position

Hello,

I would like to permanently change the HOME position. The Pro2 + should approach a (especially) different XY position before and after a print job.
He should not always go to the front left but about 40mm away.
Is this possible and if so, how?

Thank you
by Korni
Mon Oct 01, 2018 2:18 pm
Forum: Printing Settings
Topic: Just tell me what will work
Replies: 31
Views: 1539

Re: Just tell me what will work

akiraxx wrote:again



No.... looks like a ideamaker import Bug?!
by Korni
Fri Sep 28, 2018 7:06 am
Forum: Printing Settings
Topic: Just tell me what will work
Replies: 31
Views: 1539

Re: Just tell me what will work

akiraxx wrote:In the Attachment is my profile


THX, but ideaMaker crash by import (Bug? defect *.bin?) ....
by Korni
Wed Sep 26, 2018 7:30 pm
Forum: Printing Settings
Topic: Just tell me what will work
Replies: 31
Views: 1539

Re: Just tell me what will work

It is possible to print BVOH on an raise3d pro2 . See the photo. PLA on 205 °C / BVOH on 200 °C, Bed on 60°C. I have printed much more with bvoh, it just has to be very dry, the bedlevelling has to be perfect, I print without raft, only with brim, buildtak pretreated with 3d lack. Then tell us your...
by Korni
Wed Sep 26, 2018 7:26 pm
Forum: Pro2 Series
Topic: Fan wing is missing ...
Replies: 11
Views: 274

Re: Fan wing is missing ...

Vicky@Raise3D wrote:The cover at back side can be opened without taking the whole extruder apart.


Which screws have to be solved exactly to remove the cover?
by Korni
Wed Sep 26, 2018 5:56 am
Forum: Printing Settings
Topic: Just tell me what will work
Replies: 31
Views: 1539

Re: Just tell me what will work

With the Pro2 it is as good as IMpossible to print PVA & BVOH .... see http://forum.raise3d.com/viewtopic.php?f=8&t=10781
by Korni
Tue Sep 25, 2018 4:55 pm
Forum: Printing Settings
Topic: Where do these "pimples" come from?
Replies: 7
Views: 197

Re: Where do these "pimples" come from?

War nur ein Test ... aber das ist eins meiner Schwierigkeiten. Welches und warum der Einstellungen hat Priorität??? Manchmal stelle ich in "Main Template" was ein und vergesse die "Group and Layer Settings" dementsprechend anzupassen und er druckt nach den Angaben der "Group...
by Korni
Tue Sep 25, 2018 1:53 pm
Forum: Pro2 Series
Topic: Noise ....
Replies: 4
Views: 208

Re: Noise ....

Shelton wrote:Nozzle grind on material probably



I hope it ;-)

Go to advanced search